写一段STM32电灯程序
时间: 2023-10-06 07:05:21 浏览: 53
当然可以!以下是一个基本的STM32电灯程序示例:
```c
#include "stm32f4xx.h"
void delay(uint32_t time_ms) {
uint32_t i;
for (i = 0; i < time_ms * 1000; i++) {}
}
int main(void) {
// 初始化GPIO
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOA, ENABLE);
GPIO_InitTypeDef GPIO_InitStruct;
GPIO_InitStruct.GPIO_Pin = GPIO_Pin_5;
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_OUT;
GPIO_InitStruct.GPIO_OType = GPIO_OType_PP;
GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStruct.GPIO_PuPd = GPIO_PuPd_NOPULL;
GPIO_Init(GPIOA, &GPIO_InitStruct);
while (1) {
// 点亮LED
GPIO_SetBits(GPIOA, GPIO_Pin_5);
delay(1000);
// 熄灭LED
GPIO_ResetBits(GPIOA, GPIO_Pin_5);
delay(1000);
}
}
```
该程序使用了STM32F4系列的GPIOA的Pin 5作为控制电灯的引脚。在主循环中,程序会循环地点亮LED一秒钟,然后熄灭LED一秒钟。你可以根据实际需求修改延时时间或使用其他引脚来控制电灯。
请注意,该示例仅为基本示例,实际应用中可能需要进行更多的初始化和配置。确保在编译和烧录程序之前正确配置STM32F4开发板和相关的库文件。
相关推荐
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)