无线设置界面蓝牙为什么扫描不到ble设备
时间: 2023-09-17 07:14:13 浏览: 86
有可能是以下几个原因导致的:
1. BLE设备未开启或者不在可扫描范围内。
2. 手机蓝牙未开启或者不支持BLE。
3. BLE设备与手机配对成功后,第二次连接时未开启BLE设备的广播。
4. 手机蓝牙模块或者BLE设备驱动出现故障。
建议您先检查以上几个方面,并在排除软件故障后检查硬件是否有损坏或者质量问题。
相关问题
Android BLE蓝牙设置为从机模式BLE name
您可以通过以下代码将Android设备的BLE蓝牙设置为从机模式,并设置BLE名称:
```
BluetoothManager bluetoothManager = (BluetoothManager) getSystemService(Context.BLUETOOTH_SERVICE);
BluetoothAdapter bluetoothAdapter = bluetoothManager.getAdapter();
bluetoothAdapter.setName("Your_BLE_Name");
BluetoothLeAdvertiser bluetoothLeAdvertiser = bluetoothAdapter.getBluetoothLeAdvertiser();
AdvertiseSettings settings = new AdvertiseSettings.Builder()
.setAdvertiseMode(AdvertiseSettings.ADVERTISE_MODE_LOW_LATENCY)
.setConnectable(true)
.setTimeout(0)
.setTxPowerLevel(AdvertiseSettings.ADVERTISE_TX_POWER_HIGH)
.build();
AdvertiseData data = new AdvertiseData.Builder()
.setIncludeDeviceName(true)
.setIncludeTxPowerLevel(false)
.build();
bluetoothLeAdvertiser.startAdvertising(settings, data, advertiseCallback);
```
此代码将启动BLE广告程序,并将BLE名称设置为“Your_BLE_Name”。请注意,您需要在Android设备上启用蓝牙才能使用此代码。
树莓派蓝牙设置为BLE
好的,您想了解如何将树莓派设置为BLE模式。下面是详细步骤:
1. 更新系统软件包和内核:
```
sudo apt-get update
sudo apt-get upgrade
```
2. 安装蓝牙开发工具和依赖项:
```
sudo apt-get install bluetooth bluez libbluetooth-dev libudev-dev
```
3. 安装pybluez模块:
```
sudo apt-get install python3-pip
sudo pip3 install pybluez
```
4. 安装bluepy模块:
```
sudo pip3 install bluepy
```
5. 运行蓝牙服务:
```
sudo systemctl start bluetooth
```
6. 将树莓派设为BLE模式:
```
sudo hciconfig hci0 lescan
```
现在您的树莓派已经设置为BLE模式,您可以使用python编写蓝牙应用程序来与其他设备进行通信。