用ensp帮我设计一个拓扑图并写出配置命令，要求2台路由器2台三层交换机6台终端分别对应一个网段，这6台终端能够互通

好的，以下是拓扑图和配置命令：

拓扑图：

          +-----------+
          |  Router1  |
          +-----------+
                 |
                 |
          +-----------+
          |  Switch1  |
          +-----------+
          |           |
          |           |
    +-----+-----+ +-----+-----+
    |           | |           |
    |  Host1    | |  Host2    |
    |           | |           |
    +-----+-----+ +-----+-----+
          |           |
          |           |
          +-----------+
          |  Switch2  |
          +-----------+
          |           |
          |           |
    +-----+-----+ +-----+-----+
    |           | |           |
    |  Host3    | |  Host4    |
    |           | |           |
    +-----+-----+ +-----+-----+
                 |
                 |
          +-----------+
          |  Router2  |
          +-----------+

配置命令：

Router1(config)# interface GigabitEthernet0/0
Router1(config-if)# ip address 192.168.1.1 255.255.255.0
Router1(config-if)# no shutdown

Router1(config)# interface GigabitEthernet0/1
Router1(config-if)# ip address 10.0.0.1 255.255.255.0
Router1(config-if)# no shutdown

Router1(config)# ip route 0.0.0.0 0.0.0.0 10.0.0.2

Router2(config)# interface GigabitEthernet0/0
Router2(config-if)# ip address 192.168.2.1 255.255.255.0
Router2(config-if)# no shutdown

Router2(config)# interface GigabitEthernet0/1
Router2(config-if)# ip address 10.0.0.2 255.255.255.0
Router2(config-if)# no shutdown

Router2(config)# ip route 0.0.0.0 0.0.0.0 10.0.0.1

Switch1(config)# vlan 10
Switch1(config-vlan)# name VLAN10
Switch1(config-vlan)# exit

Switch1(config)# vlan 20
Switch1(config-vlan)# name VLAN20
Switch1(config-vlan)# exit

Switch1(config)# interface GigabitEthernet0/1
Switch1(config-if)# switchport mode access
Switch1(config-if)# switchport access vlan 10
Switch1(config-if)# exit

Switch1(config)# interface GigabitEthernet0/2
Switch1(config-if)# switchport mode access
Switch1(config-if)# switchport access vlan 10
Switch1(config-if)# exit

Switch1(config)# interface GigabitEthernet0/3
Switch1(config-if)# switchport mode access
Switch1(config-if)# switchport access vlan 20
Switch1(config-if)# exit

Switch1(config)# interface GigabitEthernet0/4
Switch1(config-if)# switchport mode access
Switch1(config-if)# switchport access vlan 20
Switch1(config-if)# exit

Switch1(config)# interface GigabitEthernet0/5
Switch1(config-if)# switchport mode access
Switch1(config-if)# switchport access vlan 20
Switch1(config-if)# exit

Switch2(config)# vlan 30
Switch2(config-vlan)# name VLAN30
Switch2(config-vlan)# exit

Switch2(config)# vlan 40
Switch2(config-vlan)# name VLAN40
Switch2(config-vlan)# exit

Switch2(config)# interface GigabitEthernet0/1
Switch2(config-if)# switchport mode access
Switch2(config-if)# switchport access vlan 30
Switch2(config-if)# exit

Switch2(config)# interface GigabitEthernet0/2
Switch2(config-if)# switchport mode access
Switch2(config-if)# switchport access vlan 30
Switch2(config-if)# exit

Switch2(config)# interface GigabitEthernet0/3
Switch2(config-if)# switchport mode access
Switch2(config-if)# switchport access vlan 40
Switch2(config-if)# exit

Switch2(config)# interface GigabitEthernet0/4
Switch2(config-if)# switchport mode access
Switch2(config-if)# switchport access vlan 40
Switch2(config-if)# exit

Switch2(config)# interface GigabitEthernet0/5
Switch2(config-if)# switchport mode access
Switch2(config-if)# switchport access vlan 40
Switch2(config-if)# exit

Host1(config)# interface GigabitEthernet0/0
Host1(config-if)# ip address 192.168.1.2 255.255.255.0
Host1(config-if)# no shutdown

Host2(config)# interface GigabitEthernet0/0
Host2(config-if)# ip address 192.168.1.3 255.255.255.0
Host2(config-if)# no shutdown

Host3(config)# interface GigabitEthernet0/0
Host3(config-if)# ip address 192.168.2.2 255.255.255.0
Host3(config-if)# no shutdown

Host4(config)# interface GigabitEthernet0/0
Host4(config-if)# ip address 192.168.2.3 255.255.255.0
Host4(config-if)# no shutdown