用Arduino写一个读取温湿度传感器的代码,要求使用json将读取的温湿度打包通过串口发送给esp32的代码
时间: 2023-03-15 10:02:26 浏览: 87
可以使用以下代码:#include <Arduino.h> #include <DHT.h> #include <ArduinoJson.h> //定义温湿度传感器的引脚
#define DHTPIN 4
#define DHTTYPE DHT11 //定义Json数据包的最大大小
#define MAX_SIZE 250//实例化一个温湿度传感器对象
DHT dht(DHTPIN, DHTTYPE);//定义变量储存温湿度
float temp;
float humi;//定义串口对象
HardwareSerial Serial1(1);void setup() {
// put your setup code here, to run once:
Serial.begin(115200);
Serial1.begin(115200, SERIAL_8N1, 16, 17);
dht.begin();
}void loop() {
// put your main code here, to run repeatedly: //读取温湿度
temp = dht.readTemperature();
humi = dht.readHumidity(); //创建一个Json数据包
StaticJsonBuffer<MAX_SIZE> jsonBuffer;
JsonObject& root = jsonBuffer.createObject(); //将温湿度添加到Json数据包中
root["temp"] = temp;
root["humi"] = humi; //打印Json数据包
root.printTo(Serial); //通过串口发送Json数据包
root.printTo(Serial1);}