lcd1602显示温度
时间: 2023-09-28 22:04:14 浏览: 53
要在LCD1602上显示温度,需要连接一个温度传感器到微控制器,并编写代码来读取传感器数据并将其显示在LCD上。
以下是一个Arduino示例代码,用于连接一个LM35温度传感器到LCD1602并显示温度:
```C++
#include <LiquidCrystal.h>
//定义LCD引脚
LiquidCrystal lcd(12, 11, 5, 4, 3, 2);
//定义LM35引脚
const int LM35 = A0;
void setup() {
//初始化LCD
lcd.begin(16, 2);
//设置光标位置为第一行第一列
lcd.setCursor(0,0);
//显示“Temperature: ”
lcd.print("Temperature: ");
}
void loop() {
//读取LM35传感器值
int sensorValue = analogRead(LM35);
//将传感器值转换为摄氏温度
float celsius = sensorValue * 0.48875;
//设置光标位置为第二行第一列
lcd.setCursor(0,1);
//显示摄氏温度
lcd.print(celsius);
//显示单位“C”
lcd.print("C");
//延迟500毫秒
delay(500);
}
```
请注意,此代码仅供参考,并且可能需要针对您使用的微控制器和传感器进行修改。
相关问题
单片机lcd1602显示温度
要使用单片机控制LCD1602显示温度,需要先连接温度传感器到单片机上,并通过单片机读取温度数值,然后将温度数值转换成LCD1602可以显示的格式,最后将格式化后的温度信息发送到LCD1602上显示。
以下是一个基于STM32单片机的示例代码,可以参考:
```c
#include "stm32f10x.h"
#include "lcd1602.h"
#include "dht11.h"
int main()
{
// 初始化LCD1602
LCD1602_Init();
// 初始化DHT11温湿度传感器
DHT11_Init();
while(1)
{
// 读取温度值
float temperature = DHT11_GetTemperature();
// 将温度值转换为字符串格式
char temp_str[16];
sprintf(temp_str, "Temp: %.1f C", temperature);
// 在LCD1602第一行显示温度信息
LCD1602_SetCursor(0, 0); // 设置光标位置
LCD1602_WriteString(temp_str); // 写入字符串
// 延时一段时间
for(int i=0; i<5000000; i++);
}
}
```
需要注意的是,上述示例代码中的 `DHT11_GetTemperature()` 函数需要根据具体的温度传感器类型和接线方式进行修改。
LCD1602显示温度代码
以下是一个示例Arduino代码,用于读取DS18B20温度传感器的温度,并将其显示在LCD1602上:
```cpp
#include <LiquidCrystal_I2C.h>
#include <OneWire.h>
#include <DallasTemperature.h>
// 初始化LCD1602
LiquidCrystal_I2C lcd(0x27, 16, 2);
// 设置DS18B20引脚
const int oneWireBus = 2;
// 初始化OneWire和DallasTemperature库
OneWire oneWire(oneWireBus);
DallasTemperature sensors(&oneWire);
void setup() {
// 初始化串口通信
Serial.begin(9600);
// 初始化LCD1602
lcd.begin(16, 2);
lcd.backlight();
// 初始化DS18B20温度传感器
sensors.begin();
}
void loop() {
// 请求温度数据
sensors.requestTemperatures();
// 读取温度值
float temperatureC = sensors.getTempCByIndex(0);
// 温度值显示在串口监视器上
Serial.print("Temperature: ");
Serial.print(temperatureC);
Serial.println(" °C");
// 温度值显示在LCD1602上
lcd.setCursor(0, 0);
lcd.print("Temp: ");
lcd.print(temperatureC);
lcd.print(" C");
delay(1000); // 延迟一秒钟更新温度值
}
```
请确保您已经正确连接了DS18B20温度传感器和LCD1602,并根据需要调整代码中的引脚和I2C地址。此外,您需要安装`LiquidCrystal_I2C`、`OneWire`和`DallasTemperature`库来编译和运行此代码。
相关推荐
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)