switchport access vlan
时间: 2023-09-24 12:13:02 浏览: 88
这是一个 Cisco 网络设备上的命令,用于配置交换机端口的 VLAN。该命令用于将交换机端口配置为属于指定 VLAN 的接入端口(access port)。语法如下:
```
switchport access vlan <vlan-id>
```
其中,`<vlan-id>` 是一个整数,表示要配置的 VLAN 的编号。通过这个命令,可以将交换机端口与指定的 VLAN 相关联,从而实现 VLAN 的隔离和管理。当一个端口被配置为 access port 时,它只能属于一个 VLAN,不能进行 VLAN 之间的通信。
相关问题
switchport access vlan 30
This command configures the switch port to be an access port and assigns it to VLAN 30. Any device connected to this port will be in VLAN 30 and will not be able to communicate with devices in other VLANs unless there is a Layer 3 device (such as a router) to route traffic between the VLANs.
switchport access vlan remove 10
这是一个命令,用于将 VLAN 10 从接口的访问模式中删除。这意味着该接口将不再成为 VLAN 10 的成员,因此 VLAN 10 中的任何流量都不会通过该接口传输。如果您希望将接口重新加入 VLAN 10,请使用以下命令:
```
interface <interface>
switchport access vlan 10
```
这将将接口添加回 VLAN 10,并将其设置为 VLAN 10 的成员。