烽火OLT配置命令

以下是一些常用的烽火OLT配置命令：

1. 配置端口

配置端口基本信息

interface eth [slot/port] 
description [description]  //端口描述
port link-mode [auto|force]  //链路模式
port link-type [access|hybrid]  //链路类型
port hybrid vlan [vlan-id] [tagged|untagged]  //配置Hybrid口VLAN
port default vlan [vlan-id]  //配置Access口默认VLAN
shutdown  //关闭端口
undo shutdown  //开启端口

配置端口带宽信息

interface gpon [slot/pon] 
ont-port [ont-port]  //ONT端口号
service-port [service-port]  //业务端口号
tcont [tcont-id]  //TCONT ID
gemport [gemport-id]  //GEMPORT ID
mapping-mode [vlan|priority]  //映射模式
user-vlan [vlan-id]  //用户VLAN ID

2. 配置VLAN

vlan [vlan-id]  //创建VLAN
description [description]  //VLAN描述
port eth [slot/port] [vlan-type][vlan-id] [tagged|untagged]  //配置端口的VLAN类型和VLAN ID
port vlan [vlan-id]  //查看端口的VLAN信息

3. 配置DHCP

service dhcp 
ip pool [pool-name] [start-ip-address] [end-ip-address]  //配置IP地址池
gateway-list [gateway-address]  //配置网关
dns-list [dns-address]  //配置DNS服务器
lease day [day] hour [hour] minute [minute]  //配置IP地址租赁时间

4. 配置PPPoE

service-port [service-port]  //创建PPPoE业务端口
pppoe-server bind-service-port [service-port]  //绑定PPPoE业务端口
pppoe-server enable  //启用PPPoE服务
interface pppoe-server [slot/pon] [ont-id] [ont-port]  //进入PPPoE业务视图
pppoe-server bind-vlan [vlan-id]  //绑定VLAN
pppoe-server authentication-mode [local|radius|none]  //认证方式

5. 配置QoS

qos-profile [profile-name]  //创建QoS配置模板
remark [remark-name]  //创建QoS remark
car cir [rate] cbs [value] ebs [value]  //配置CAR
queue queue-id [queue-weight] [queue-priority]  //配置队列
policy policy-name [policy-priority]  //配置QoS策略
classifier [classifier-name] [operator] [value]  //创建分类器

以上是一些常用的烽火OLT配置命令，具体使用时需要根据实际情况进行操作。