nmap设置代理扫描10.10.10.0网段
时间: 2023-09-20 07:02:56 浏览: 98
如果你需要在使用nmap扫描10.10.10.0网段时设置代理,可以使用以下命令:
```
nmap -sP 10.10.10.0/24 --proxy socks4://proxy.example.com:1080
```
其中,"-sP"参数表示使用ping扫描,"10.10.10.0/24"是你要扫描的网段,"--proxy"参数指定了代理服务器的地址和端口号。这个命令会扫描这个网段中的所有IP地址,并且通过指定的代理服务器进行扫描。你可以根据需要调整扫描的网段和其他参数,以及代理服务器的地址和端口号。
相关问题
nmap -sU -p 8889 10.10.10.143
您好!对于您提出的问题,我可以为您提供一些关于使用nmap命令扫描指定IP地址和端口的基本信息。
`nmap -sU -p 8889 10.10.10.143`是一个nmap命令的示例,用于扫描指定IP地址(10.10.10.143)的UDP端口(8889)。
具体命令的含义如下:
- `-sU`参数表示进行UDP扫描。
- `-p 8889`参数表示指定要扫描的端口为8889。
- `10.10.10.143`是目标IP地址。
通过使用这个命令,您可以扫描指定IP地址上的UDP端口,以了解目标主机上是否有开放的UDP端口。请注意,在执行此类扫描时,请确保您具有授权和合法性,以遵守相关法律和政策。
希望这些信息对您有所帮助!如果您有任何其他问题,请随时提问。
nmap -v scanme.nmap.org 扫描与 nmap -vv scanme.nmap.org 扫描的区别是什么
根据提供的引用[1],nmap是一款网络探测和安全审计工具。使用-v选项可以增加扫描的详细程度,使用-vv选项可以进一步增加详细程度。因此,nmap -v scanme.nmap.org扫描的详细程度比nmap -vv scanme.nmap.org扫描的详细程度要少。
下面是两个命令的示例:
1. nmap -v scanme.nmap.org扫描的输出示例:
```shell
Starting Nmap 7.80 ( https://nmap.org ) at 2021-08-17 09:30 PDT
Initiating Ping Scan at 09:30
Scanning scanme.nmap.org (45.33.32.156) [2 ports]
Completed Ping Scan at 09:30, 0.00s elapsed (1 total hosts)
Initiating Parallel DNS resolution of 1 host. at 09:30
Completed Parallel DNS resolution of 1 host. at 09:30, 0.02s elapsed
Initiating Connect Scan at 09:30
Scanning scanme.nmap.org (45.33.32.156) [1000 ports]
Discovered open port 80/tcp on 45.33.32.156
Discovered open port 22/tcp on 45.33.32.156
Completed Connect Scan at 09:30, 0.11s elapsed (1000 total ports)
Nmap scan report for scanme.nmap.org (45.33.32.156)
Host is up (0.11s latency).
Other addresses for scanme.nmap.org (not scanned): 2600:3c03::f03c:91ff:fe18:bb2f
Not shown: 998 filtered ports
PORT STATE SERVICE
22/tcp open ssh
80/tcp open http
Read data files from: /usr/bin/../share/nmap
Nmap done: 1 IP address (1 host up) scanned in 0.18 seconds
```
2. nmap -vv scanme.nmap.org扫描的输出示例:
```shell
Starting Nmap 7.80 ( https://nmap.org ) at 2021-08-17 09:31 PDT
Initiating Ping Scan at 09:31
Scanning scanme.nmap.org (45.33.32.156) [2 ports]
Packet capture filter (device eth0): icmp and ((ip[20:2] - ip[16:2]) - ((ip[0]&0xf)<<2)) != 0
Completed Ping Scan at 09:31, 0.00s elapsed (1 total hosts)
Initiating Parallel DNS resolution of 1 host. at 09:31
Completed Parallel DNS resolution of 1 host. at 09:31, 0.02s elapsed
Initiating Connect Scan at 09:31
Scanning scanme.nmap.org (45.33.32.156) [1000 ports]
Discovered open port 80/tcp on 45.33.32.156
Discovered open port 22/tcp on 45.33.32.156
Completed Connect Scan at 09:31, 0.11s elapsed (1000 total ports)
Nmap scan report for scanme.nmap.org (45.33.32.156)
Host is up, received syn-ack (0.11s latency).
Other addresses for scanme.nmap.org (not scanned): 2600:3c03::f03c:91ff:fe18:bb2f
Not shown: 998 filtered ports
Reason: 998 no-responses and 2 host-prohibited
PORT STATE SERVICE REASON
22/tcp open ssh syn-ack ttl 56
80/tcp open http syn-ack ttl 56
Read data files from: /usr/bin/../share/nmap
Nmap done: 1 IP address (1 host up) scanned in 0.18 seconds
```