锐捷路由器串口捆绑配置命令

锐捷路由器串口捆绑配置命令如下：

1. 开启串口：

config terminal
interface serial 0/0/0
no shutdown

2. 配置串口IP地址：

config terminal
interface serial 0/0/0
ip address 192.168.1.1 255.255.255.0

3. 配置串口协议：

config terminal
interface serial 0/0/0
encapsulation ppp

4. 配置串口用户名和密码：

config terminal
username test password test
interface serial 0/0/0
ppp authentication chap
ppp chap hostname test
ppp chap password test

5. 配置串口捆绑：

config terminal
interface multilink 1
ip address 10.0.0.1 255.255.255.0
ppp multilink
ppp multilink group 1
ppp multilink fragment delay 20
ppp multilink interleave

6. 添加串口到捆绑接口中：

config terminal
interface multilink 1
no ip address
ppp multilink
ppp multilink group 1
ppp multilink fragment delay 20
ppp multilink interleave
multilink bundle-name test
multilink bundle algorithm balanced
interface serial 0/0/0
ppp multilink
ppp multilink group 1
multilink bundle-name test
multilink bundle algorithm balanced

注意：以上命令仅供参考，具体操作需根据实际情况进行调整。