基于32F103单片机通过SPI驱动AD7689读取AD7689的8个通道的代码
时间: 2024-01-11 20:02:05 浏览: 96
下面是基于STM32F103单片机通过SPI驱动AD7689读取8个通道数据的示例代码:
```c
#include "stm32f10x.h"
// 定义AD7689的引脚和SPI接口
#define AD7689_CS_PIN GPIO_Pin_4
#define AD7689_CS_PORT GPIOA
#define AD7689_SPI SPI1
// 定义通道数和数据缓冲区大小
#define NUM_CHANNELS 8
#define BUFFER_SIZE 8
// 函数声明
void AD7689_Init(void);
void AD7689_Read_Channel(uint8_t channel, uint16_t *data);
int main(void)
{
// 初始化AD7689
AD7689_Init();
// 定义数据缓冲区
uint16_t dataBuffer[BUFFER_SIZE];
// 读取8个通道的数据
for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++)
{
AD7689_Read_Channel(channel, &dataBuffer[channel]);
}
while (1)
{
// 你的主程序代码
}
}
// 初始化AD7689
void AD7689_Init(void)
{
GPIO_InitTypeDef GPIO_InitStruct;
SPI_InitTypeDef SPI_InitStruct;
// 使能SPI1和GPIOA时钟
RCC_APB2PeriphClockCmd(RCC_APB2Periph_SPI1 | RCC_APB2Periph_GPIOA, ENABLE);
// 配置AD7689的片选引脚为推挽输出
GPIO_InitStruct.GPIO_Pin = AD7689_CS_PIN;
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(AD7689_CS_PORT, &GPIO_InitStruct);
// 配置SPI1引脚
GPIO_InitStruct.GPIO_Pin = GPIO_Pin_5 | GPIO_Pin_6 | GPIO_Pin_7;***