sprintf(time_str, "%02d:%02d:%02d", hour, minute, second);解释这段代码
时间: 2024-05-18 11:13:05 浏览: 20
这段代码使用了C标准库中的sprintf函数,将时间数据转换为字符串格式。具体来说,"%02d:%02d:%02d"表示格式化字符串,其中:%02d表示将一个整数按照2位数进行格式化输出,如果不足2位,则在前面补0;":"表示输出一个冒号分隔符,将小时、分钟、秒钟三个数据分隔开来。hour、minute、second分别是需要格式化的三个整数数据,它们会按照"%02d"的格式进行输出,并且用":"进行分隔,最终将格式化后的字符串存储到time_str数组中。例如,如果hour=12,minute=30,second=45,则输出的字符串为"12:30:45"。
相关问题
#include <reg52.h>#include <stdio.h>#define FREQ 11059200UL#define BAUD_RATE 9600#define TIMER0_RELOAD_VALUE 256 - FREQ / 12 / BAUD_RATEsbit D1 = P1 ^ 0;sbit D2 = P1 ^ 1;sbit D3 = P1 ^ 2;sbit D4 = P1 ^ 3;sbit D5 = P1 ^ 4;sbit D6 = P1 ^ 5;sbit D7 = P1 ^ 6;sbit D8 = P1 ^ 7;void init_timer0();void init_uart();void send_string(char *str);void update_display();volatile unsigned char ms_counter;volatile unsigned char display_buffer[8];volatile char uart_buffer[20];volatile unsigned char uart_buffer_index;void main() { init_timer0(); init_uart(); while (1) { update_display(); }}void init_timer0() { TMOD |= 0x01; TH0 = TIMER0_RELOAD_VALUE; TL0 = TIMER0_RELOAD_VALUE; TR0 = 1; ET0 = 1; EA = 1;}void init_uart() { TMOD |= 0x20; SCON = 0x50; TH1 = 0xfd; TL1 = 0xfd; TR1 = 1; ES = 1;}void send_string(char *str) { while (*str) { SBUF = *str++; while (!TI); TI = 0; }}void update_display() { // TODO: 更新时钟显示内容 // 将时钟内容转换为字符串格式,存储到 uart_buffer 中 // 例如:sprintf(uart_buffer, "%02d:%02d:%02d", hour, minute, second); send_string(uart_buffer);}void timer0_isr() interrupt 1 { TH0 = TIMER0_RELOAD_VALUE; TL0 = TIMER0_RELOAD_VALUE; ms_counter++; if (ms_counter == 10) { ms_counter = 0; update_display(); }}void uart_isr() interrupt 4 { if (RI) { RI = 0; uart_buffer[uart_buffer_index++] = SBUF; if (uart_buffer_index >= sizeof(uart_buffer)) { uart_buffer_index = 0; } }}对上面代码逐句解析
好的,让我逐句解析一下这段代码。
```c
#include <reg52.h>
#include <stdio.h>
```
这两行代码引入了头文件 `reg52.h` 和 `stdio.h`,前者是 8051 系列单片机的头文件,后者是标准 C 语言的输入输出库。
```c
#define FREQ 11059200UL
#define BAUD_RATE 9600
#define TIMER0_RELOAD_VALUE 256 - FREQ / 12 / BAUD_RATE
```
这三行代码定义了一些常量,包括时钟频率、波特率和定时器 0 的重载值。这些常量将在后面的代码中用到。
```c
sbit D1 = P1 ^ 0;
sbit D2 = P1 ^ 1;
sbit D3 = P1 ^ 2;
sbit D4 = P1 ^ 3;
sbit D5 = P1 ^ 4;
sbit D6 = P1 ^ 5;
sbit D7 = P1 ^ 6;
sbit D8 = P1 ^ 7;
```
这八行代码定义了八个数码管的位选端口,即 P1 口的 0 到 7 号位。
```c
void init_timer0();
void init_uart();
void send_string(char *str);
void update_display();
```
这四行代码声明了四个函数,分别用于初始化定时器 0、初始化串口、发送字符串到串口和更新数码管显示内容。
```c
volatile unsigned char ms_counter;
volatile unsigned char display_buffer[8];
volatile char uart_buffer[20];
volatile unsigned char uart_buffer_index;
```
这四行代码定义了一些全局变量,包括毫秒计数器、数码管显示缓冲区、串口接收缓冲区和串口接收缓冲区索引。
```c
void main() {
init_timer0();
init_uart();
while (1) {
update_display();
}
}
```
这个 `main()` 函数是程序的入口,首先调用 `init_timer0()` 和 `init_uart()` 函数分别初始化定时器 0 和串口,然后进入一个死循环,在循环中不断调用 `update_display()` 函数更新数码管显示内容。
```c
void init_timer0() {
TMOD |= 0x01;
TH0 = TIMER0_RELOAD_VALUE;
TL0 = TIMER0_RELOAD_VALUE;
TR0 = 1;
ET0 = 1;
EA = 1;
}
```
这个函数用于初始化定时器 0,将其设置为模式 1(16 位定时器),并设置重载值。然后启动定时器 0 并开启定时器 0 中断和总中断。
```c
void init_uart() {
TMOD |= 0x20;
SCON = 0x50;
TH1 = 0xfd;
TL1 = 0xfd;
TR1 = 1;
ES = 1;
}
```
这个函数用于初始化串口,将其设置为模式 1(8 位异步收发),波特率为 9600。然后启动串口并开启串口中断。
```c
void send_string(char *str) {
while (*str) {
SBUF = *str++;
while (!TI);
TI = 0;
}
}
```
这个函数用于发送字符串到串口,通过循环将字符串中的每个字符发送到 SBUF 寄存器,然后等待 TI 标志位置 1,表示数据已经发送完成,将 TI 标志位清零。
```c
void update_display() {
// TODO: 更新时钟显示内容
// 将时钟内容转换为字符串格式,存储到 uart_buffer 中
// 例如:sprintf(uart_buffer, "%02d:%02d:%02d", hour, minute, second);
send_string(uart_buffer);
}
```
这个函数用于更新数码管显示内容。在函数中需要更新时钟显示内容,并将时钟内容转换为字符串格式,存储到 `uart_buffer` 中。然后调用 `send_string()` 函数将 `uart_buffer` 中的内容发送到串口。
```c
void timer0_isr() interrupt 1 {
TH0 = TIMER0_RELOAD_VALUE;
TL0 = TIMER0_RELOAD_VALUE;
ms_counter++;
if (ms_counter == 10) {
ms_counter = 0;
update_display();
}
}
```
这个函数是定时器 0 的中断服务程序,每隔一定时间(10 毫秒)触发一次中断。在中断服务程序中需要更新毫秒计数器并调用 `update_display()` 函数更新数码管显示内容。
```c
void uart_isr() interrupt 4 {
if (RI) {
RI = 0;
uart_buffer[uart_buffer_index++] = SBUF;
if (uart_buffer_index >= sizeof(uart_buffer)) {
uart_buffer_index = 0;
}
}
}
```
这个函数是串口的中断服务程序,每当接收到一个字符时触发一次中断。在中断服务程序中需要将接收到的字符存储到 `uart_buffer` 中,并根据需要更新 `uart_buffer_index` 变量的值。
怎么实现时间补0 stm32 并实现 hour minute second 分别竖屏显示
可以使用 sprintf 函数将时间转换为字符串,并在需要的位置补0,然后将字符串分别显示在竖屏上。以下是一个示例代码:
```c
#include <stdio.h>
#include "stm32f4xx.h"
void display_vertical(char *str) {
// 在竖屏上显示字符串
}
void display_time(uint8_t hour, uint8_t minute, uint8_t second) {
char str[9];
sprintf(str, "%02d:%02d:%02d", hour, minute, second);
display_vertical(str);
}
int main(void) {
uint8_t hour = 8, minute = 30, second = 0;
// 初始化 STM32
while (1) {
// 更新时间
display_time(hour, minute, second);
// 延时一秒
if (++second >= 60) {
second = 0;
if (++minute >= 60) {
minute = 0;
if (++hour >= 24) {
hour = 0;
}
}
}
}
}
```
相关推荐
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)