用c写一个定时器2当波特率发生器的代码
时间: 2024-05-04 10:18:25 浏览: 11
以下是一个使用定时器2作为波特率发生器的C代码示例:
```c
#include <avr/io.h>
// Define baud rate and UBRR value
#define BAUD 9600
#define UBRR_VALUE ((F_CPU / (16 * BAUD)) - 1)
int main(void)
{
// Set baud rate
UBRRH = (UBRR_VALUE >> 8);
UBRRL = UBRR_VALUE;
// Enable transmitter and receiver
UCSRB = (1 << TXEN) | (1 << RXEN);
// Set frame format: 8 data bits, 1 stop bit, no parity
UCSRC = (1 << UCSZ1) | (1 << UCSZ0);
// Initialize Timer2
TCCR2 = (1 << WGM21) | (1 << CS22) | (1 << CS21) | (1 << CS20);
OCR2 = 155;
while (1)
{
// Send data through USART
while (!(UCSRA & (1 << UDRE)));
UDR = 'A';
}
}
```
在上面的代码中,我们使用了AVR微控制器的定时器2来生成波特率。通过设置TCCR2寄存器的WGM21位,我们启用了CTC模式。然后,通过设置CS22、CS21和CS20位,我们设置了预分频器为1024。最后,我们设置OCR2寄存器的值为155,这将导致定时器在156个时钟周期后触发中断,因此我们的波特率将设置为9600。
在主循环中,我们使用USART发送数据。我们使用UDRE位来检查USART数据寄存器是否为空,如果为空,则将“A”字符发送到UDR寄存器中。