linux module怎么设置延时probe
时间: 2024-01-31 18:02:38 浏览: 25
在Linux内核中,可以通过在module的probe函数中使用msleep()函数来设置延时。msleep()函数的参数是以毫秒为单位的整数值,表示延时的时间。
例如,下面的代码片段演示了如何在probe函数中设置延时5秒钟:
```
static int my_device_probe(struct platform_device *pdev)
{
int ret;
// 延时5秒钟
msleep(5000);
// 其他操作...
return ret;
}
```
需要注意的是,在Linux内核中使用延时函数会阻塞当前进程或线程的执行,因此应该谨慎使用。如果需要在probe函数中执行长时间的操作,可以考虑使用工作队列或定时器等机制来实现异步执行。
相关问题
linux i2c probe 函数示例
以下是一个简单的 i2c_probe 函数示例:
```
static int my_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
struct my_data *data;
int err;
// Allocate memory for our private data structure
data = devm_kzalloc(&client->dev, sizeof(struct my_data), GFP_KERNEL);
if (!data) {
dev_err(&client->dev, "Failed to allocate memory\n");
return -ENOMEM;
}
// Initialize our private data structure
data->client = client;
// Set up any necessary hardware
err = my_hardware_setup(data);
if (err) {
dev_err(&client->dev, "Failed to set up hardware\n");
return err;
}
// Register our device with the kernel
err = devm_device_add(&client->dev, &data->client->dev);
if (err) {
dev_err(&client->dev, "Failed to register device\n");
return err;
}
// Store our private data structure in the i2c_client structure
i2c_set_clientdata(client, data);
dev_info(&client->dev, "Device probed successfully\n");
return 0;
}
```
注释中已经解释了每个步骤的作用,这个函数的目的是在 i2c 总线上探测并初始化一个新的 i2c 设备。
linux probe
"probe" 在 Linux 中通常指的是内核模块的探测(probing)功能。每当内核启动或加载新的模块时,它都会探测硬件设备以获取其信息并与之交互。
通过探测硬件设备,内核可以检测到设备的存在并加载相应的驱动程序,以便与设备进行通信。探测的过程包括识别设备的类型、厂商和型号等信息,并按照一定的规则进行配置和初始化。
在 Linux 中,可以使用工具如 lspci、lsusb、dmesg 等来查看设备探测的信息。内核模块也可以使用内核 API 来进行设备探测和配置。