用for循环写出生日快乐歌的蜂鸣代码,c语言
时间: 2024-05-22 17:16:40 浏览: 44
#include <stdio.h>
#include <windows.h> //需要用到Beep函数
int main()
{
int notes[] = { 262, 262, 294, 262, 349, 330, 262, 262, 294, 262, 392, 349, 262, 262, 523, 440, 349, 330, 294, 466, 466, 440, 349, 392, 349 };
int durations[] = { 200, 200, 400, 400, 400, 800, 200, 200, 400, 400, 400, 800, 200, 200, 400, 400, 400, 200, 200, 400, 200, 200, 400, 400, 400, 800 };
for (int i = 0; i < sizeof(notes) / sizeof(notes[0]); i++)
{
Beep(notes[i], durations[i]); //调用Beep函数播放音符
}
printf("Happy Birthday to You!\n"); //输出歌词
return 0;
}
相关问题
stm32f103c8t6蜂鸣器播放生日歌代码 c语言
在STM32F103C8T6微控制器上使用C语言编写代码来控制蜂鸣器播放生日歌,通常需要以下几个步骤:
1. **头文件包含**:
首先,你需要包含必要的头文件,如`stm32f10x.h`(硬件库),`delay.h`(延时函数),以及音频相关的头文件。
2. **初始化硬件**:
确保GPIO口配置为推挽输出,用于驱动蜂鸣器,以及定时器或DMA配置以产生音频波形。
```c
#include "stm32f10x.h"
#include "delay.h"
void init_horn();
```
3. **定义音符数组**:
创建一个数组,存储生日歌的每个音节对应的PWM占空比或者频率。
4. **播放循环**:
使用`while`循环,读取音符数组,设置蜂鸣器的PWM值或频率,并插入适当的延时以实现音调和节奏。
```c
void play_birthday_song() {
uint16_t note[] = { /* 生日歌音符数组 */ };
int i;
for (i = 0; i < sizeof(note) / sizeof(note); i++) {
set_horn_pwm(note[i]); // 设置PWM值
delay_ms(100); // 短暂延迟
}
}
```
5. **函数实现**:
根据你的硬件配置,可能需要实现`init_horn()`函数来初始化GPIO口和设置PWM模式,或者`set_horn_pwm()`函数来设置实际的PWM值。
```c
void init_horn() {
GPIO_InitTypeDef GPIO_InitStructure;
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9; // 蜂鸣器引脚
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
HAL_GPIO_Init(GPIOA, &GPIO_InitStructure);
HAL_TIM_PWM_Init(&htim1); // 如果使用的是TIM,初始化TIM脉宽调制
}
void set_horn_pwm(uint16_t duty_cycle) {
TIM_OC_InitTypeDef sConfig;
sConfig.OCMode = TIM_OCMode_PWM1;
sConfig.Pulse = duty_cycle;
sConfig.OCPolarity = TIM_OCPolarity_High;
sConfig.OCFastMode = DISABLE;
HAL_TIM_PWM_ConfigChannel(&htim1, &sConfig);
HAL_TIM_PWM_Start(&htim1, TIM_CHANNEL_1); // 启动相应通道
}
```
6. **主函数**:
在`main()`函数中调用上述初始化和播放函数。
```c
int main(void) {
init_horn();
play_birthday_song();
while (1) {}
return 0;
}
```
stm32f103c8t6蜂鸣器播放生日歌代码 c语言 标准库
在STM32F103C8T6微控制器上使用C语言通过标准库控制蜂鸣器播放生日歌,你需要首先了解几个关键步骤:
1. 初始化GPIO和PWM模块:蜂鸣器通常通过PWM信号来驱动,所以需要配置GPIO作为PWM输出。
2. 设置PWM频率和占空比:根据蜂鸣器的要求设置合适的PWM频率和周期,模拟音频波形。
3. 编写生日歌的音乐数组或定时器:创建一个数组来存储生日歌的音频脉冲,或者使用定时器配合中断来控制PWM输出。
以下是一个简化的示例代码片段,用于演示基本概念:
```c
#include "stm32f10x.h" // 引入STM32的头文件
#include <stm32f10x_rcc.h> // 包含RCC定时器配置部分
// 假设我们有一个定义好的蜂鸣器引脚GPIOA Pin PA7
GPIO_InitTypeDef GPIO_InitStructure;
uint8_t music[] = {0b00111111, 0b00011111, ...}; // 生日歌的PWM脉冲数组
// 初始化GPIO
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_7;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; // Push-Pull输出
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
HAL_GPIO_Init(GPIOA, &GPIO_InitStructure);
// 初始化PWM
RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE); // 启动TIM2时钟
TIM_TimeBaseInitTypeDef TIM_InitStructure;
TIM_InitStructure.TIM_Period = 20000; // 设置周期为20000个时钟周期(取决于系统时钟)
TIM_InitStructure.TIM_Prescaler = 8400; // 根据系统时钟计算出的值
TIM_InitStructure.TIM_ClockDivision = TIM_CKD_DIV1;
TIM_InitStructure.TIM_CounterMode = TIM_CounterMode_Up;
HAL_TIM_TimeBaseInit(TIM2, &TIM_InitStructure);
HAL_TIM_PWM_Init(TIM2); // 初始化PWM模式
HAL_TIM_PWM_MspInit(TIM2); // 初始化PWM的时钟资源
// 更新PWM值
void play_music(uint8_t note) {
uint16_t duty_cycle = note * (TIM2->ARR / sizeof(music)); // 计算占空比
HAL_TIM_PWM_SetDutyCycle(TIM2, duty_cycle);
}
int main() {
// 开始播放生日歌
for (uint8_t i = 0; i < sizeof(music); ++i) {
play_music(music[i]);
HAL_Delay(200); // 暂停一段时间,让音符持续
}
while (1) {
// 循环播放,如果需要的话
}
}
```