#define FUNC_P2VAR(rettype, ptrclass, memclass) ptrclass rettype * memclass
时间: 2024-05-07 07:23:08 浏览: 11
这是一个宏定义,用于定义一个指向某个类成员的指针类型。具体解释如下:
- rettype:表示指针所指向的数据类型,比如 int、float、struct 等。
- ptrclass:表示指针类型,可以是 *、**、*** 等,用于表示指针的级别。
- memclass:表示指针所指向的类成员所在的存储区域,可以是 const、volatile、const volatile 等。
举个例子,如果我们定义了一个名为 MyClass 的类,其中有一个名为 myMember 的成员变量,我们可以使用该宏定义一个指向该成员变量的指针类型:
```
typedef struct {
int myMember;
} MyClass;
FUNC_P2VAR(int, *, MYCLASS_VAR) pMyMember;
```
这里,我们使用了宏定义,将 `ptrclass` 替换为了 `*`,将 `rettype` 替换为了 `int`,将 `memclass` 替换为了 `MYCLASS_VAR`。因此,宏展开后的效果相当于:
```
typedef int * MYCLASS_VAR * pMyMember;
```
这样,我们就定义了一个名为 `pMyMember` 的指针变量,它指向一个 `int` 类型的数据,该数据是 `MyClass` 类中的 `myMember` 成员变量。同时,该指针变量所在的存储区域是 `MYCLASS_VAR`。
相关问题
#ifndef IOT_ERRNO_API_H #define IOT_ERRNO_API_H #ifdef __cplusplus extern "C" { #endif #define ERR_OK 0 /* invalid parameters */ #define ERR_INVAL 1 /* out of memory */ #define ERR_NOMEM 2 /* not supported */ #define ERR_NOSUPP 3 /* not secure due to white list */ #define ERR_NOSEC_WL 4 /* not exist */ #define ERR_NOT_EXIST 5 /* again */ #define ERR_AGAIN 6 /* dev not ready */ #define ERR_NOT_READY 7 /* already exist */ #define ERR_EXIST 8 /* busy */ #define ERR_BUSY 9 /* pending */ #define ERR_PENDING 10 /* failed */ #define ERR_FAIL 11 /* not secure due to black list */ #define ERR_NOSEC_BL 12 /* calculated crc but len < 0 */ #define ERR_CRC_LEN 13 /* disconnect */ #define ERR_DISCONNECT 14 /* timeout */ #define ERR_TIMEOVER 15 /* crc check failed */ #define ERR_CRC_FAIL 16 #ifdef __cplusplus } #endif
这段代码是一个头文件的定义,作用是声明一些宏定义和错误码常量。
- `#ifndef`和`#define`是为了避免头文件被重复包含而引起的编译错误。
- 代码中使用了一些预处理指令,如`#ifdef`、`#endif`、`#define`,用于在不同的情况下控制代码的编译。
- `__cplusplus`是一个预定义的宏,用于判断是否处于C++环境下编译。
- `extern "C"`用于告诉编译器使用C语言的调用规则(C linkage)来编译这些函数,以便在C++程序中使用这些函数。
- 代码中定义了一些错误码常量,如`ERR_OK`、`ERR_INVAL`等,用于在程序中表示不同的错误情况。这些常量可以在程序中直接使用,避免了程序中硬编码错误码的问题。
- 头文件中的宏定义和常量的命名规则一般要符合一定的规范,以便提高代码的可读性和可维护性。
#if defined (STM32F10X_LD_VL) || (defined STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) /* #define SYSCLK_FREQ_HSE HSE_VALUE */ #define SYSCLK_FREQ_24MHz 24000000 #else /* #define SYSCLK_FREQ_HSE HSE_VALUE */ /* #define SYSCLK_FREQ_24MHz 24000000 */ /* #define SYSCLK_FREQ_36MHz 36000000 */ /* #define SYSCLK_FREQ_48MHz 48000000 */ /* #define SYSCLK_FREQ_56MHz 56000000 */ #define SYSCLK_FREQ_72MHz 72000000 #endif
这段代码是针对不同型号的 STM32 微控制器定义系统时钟频率的宏。如果当前使用的是 STM32F10X_LD_VL、STM32F10X_MD_VL 或者 STM32F10X_HD_VL 型号的微控制器,则将系统时钟频率定义为 24MHz。否则,将系统时钟频率定义为 72MHz。在注释中还给出了其他可能的时钟频率选项,但是被注释掉了。