三层网络架构中,怎样在华为核心交换机上配置mac地址认证
时间: 2024-03-23 13:38:53 浏览: 19
在华为三层核心交换机上,可以通过以下步骤配置MAC地址认证:
1. 先进入交换机用户视图,并切换到系统视图:
```
<Switch>system-view
```
2. 创建MAC地址认证模板:
```
[Switch]mac-authentication-profile name profile-name
```
其中,profile-name 为模板名称,可根据实际情况进行自定义。
3. 配置MAC地址认证模板参数:
```
[Switch-mac-authen-profile-profile-name]authentication-mode {mac-authen|mac-bypass}
[Switch-mac-authen-profile-profile-name]authentication-order {mac-authen-first|dot1x-authen-first}
[Switch-mac-authen-profile-profile-name]authentication-scheme {mac-only|mac-domain|mac-bypass}
[Switch-mac-authen-profile-profile-name]re-authenticate {enable|disable}
```
其中,各参数含义如下:
- authentication-mode:指定认证模式,可选值为 mac-authen 或 mac-bypass;
- authentication-order:指定认证顺序,可选值为 mac-authen-first 或 dot1x-authen-first;
- authentication-scheme:指定认证方案,可选值为 mac-only、mac-domain 或 mac-bypass;
- re-authenticate:指定是否开启重新认证功能,可选值为 enable 或 disable。
4. 创建MAC地址认证域:
```
[Switch]mac-domain name domain-name
```
其中,domain-name 为域名称,可根据实际情况进行自定义。
5. 将MAC地址认证模板绑定到MAC地址认证域:
```
[Switch-mac-domain-domain-name]authentication-profile profile-name
```
其中,profile-name 为第2步中创建的MAC地址认证模板名称。
6. 配置端口的MAC地址认证方式:
```
[Switch]interface interface-type interface-number
[Switch-interface]interface mac-authentication {mac-authen|mac-bypass} mac-address
```
其中,interface-type 为接口类型,interface-number 为接口编号,mac-address 为要认证的MAC地址。
完成以上配置后,当设备接入交换机的时候,交换机会对设备的MAC地址进行认证,如果认证通过,则设备可以正常接入网络。如果认证失败,则设备无法接入网络。