将STM32F103C8T6的A口和B口的32个引脚设置为GPIO口的代码
时间: 2024-05-05 22:18:43 浏览: 7
以下是将STM32F103C8T6的A口和B口的32个引脚设置为GPIO口的代码:
```
#include "stm32f10x.h"
void GPIO_Configuration(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
// Enable GPIOA and GPIOB Clock
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOB, ENABLE);
// Configure GPIOA pins as output push-pull low-speed
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_All;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_Init(GPIOA, &GPIO_InitStructure);
// Configure GPIOB pins as input floating
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_All;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
GPIO_Init(GPIOB, &GPIO_InitStructure);
}
int main(void)
{
// Configure GPIO pins
GPIO_Configuration();
while (1)
{
// Your code here
}
}
```
注意:以上代码是设置所有A口和B口的引脚为GPIO口,具体需要根据实际情况进行修改。