uint16_t const tab[16]={2,2,2,2,2,4,0,4,0,4,0,8,8,8,8,8};
时间: 2024-06-16 11:07:50 浏览: 13
uint16_t const tab[16]={2,2,2,2,2,4,0,4,0,4,0,8,8,8,8,8}是一个包含16个元素的常量数组,每个元素的类型为uint16_t,即无符号16位整数。数组中的元素依次为2, 2, 2, 2, 2, 4, 0, 4, 0, 4, 0, 8, 8, 8, 8, 8。
相关问题
#include<reg52.h> #include<intrins.h> #define uchar unsigned char #define uint unsigned int sbit K1=P3^2; sbit beep=P3^7; uchar i; uchar song_Index=0,Tone_Index=0; uchar*song_Tone,*song_Time; const LED_tab[]={0xC0,0xF9,0xA4,0xB0,0x99,0x92,0x82,0xF8,0x80,0x90,0x88,0x83,0xC6,0xA1,0x86,0x8E,0xBF,0xFF}; Unsigned int Tone_tab[]={62018,62401,62491,62895,63184,63441,63506,63773,63965,64137,64215,64360,64488,64603,64654,64751,64836,64876,64948,65012,65067,65535};
这段代码包含了一些头文件和宏定义,以及一些变量和常量的定义。
头文件reg52.h和intrins.h分别定义了51单片机的寄存器和一些内置的汇编指令,用于控制单片机的操作。
宏定义#define uchar unsigned char和#define uint unsigned int分别定义了uchar和uint两个类型,分别表示无符号的8位和16位整数。
sbit K1=P3^2;和sbit beep=P3^7;分别定义了P3口的第2位和第7位,用于控制外部设备的开关。
变量i、song_Index和Tone_Index分别是无符号的8位整数,用于控制循环和计数。
song_Tone和song_Time是指向uchar类型的指针,用于存储歌曲的音调和节奏。
常量数组LED_tab和Tone_tab分别存储了LED灯和蜂鸣器的控制数据,可以通过访问数组元素来控制LED灯和蜂鸣器的状态。
#include<reg51.h> #define uchar unsigned char #define uint unsigned int #define LED P1 sbit CS2=P2^1; sbit CS1=P2^0; const uchar tab[]={0xC0,0xF9,0xA4,0xB0,0x99,0x92,0x82,0xF8,0x80,0x90}; uchar data_L,data_H; uchar t,a; void delay(uint k) { uint m,n; for(m=0;m<k;m++) { for(n=0;n<120;n++); } } void display(void) { LED=tab[data_H]; CS1=1; delay(1); CS1=0; LED=tab[data_L]; CS2=1; delay(1); CS2=0; } void Timer0() interrupt 1 { t++; TH0=0x4C; TL0=0x00; } void data_tim(void) { if(t==20) { t=0; if(a==00) {a=59;} else {a--;} } } void data_in(void) { data_L=a%10; data_H=a/10; } void T0_init(void) { TMOD=0x01; TH0=0x4C; TL0=0x00; ET0=1; TR0=1; EA=1; } void main(void) { a=0; T0_init(); while(1) { data_tim(); data_in(); display(); } }工作原理
这是一段基于单片机的数字钟代码,使用了51单片机的定时器和端口控制实现数码管显示。其中,`tab`数组存储了0~9数字的编码,`display()`函数将当前需要显示的数字存储在`data_L`和`data_H`中,通过端口控制将其显示在数码管上。定时器中断每1ms触发一次,计数器`t`每次加1,当`t`等于20时,即20ms过去了,就将`t`清零,同时将`a`的值减1,实现了1秒钟倒计时的功能。`data_in()`函数将当前计时器的值转换为两个数字,分别存储在`data_L`和`data_H`中。整个程序通过不断循环实现了数字钟的显示效果。
相关推荐
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![7z](https://img-home.csdnimg.cn/images/20210720083312.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)