8个led灯循环点亮程序c语言
时间: 2024-03-26 10:41:32 浏览: 25
以下是一个简单的C语言程序,可以循环点亮8个LED灯:
```c
#include <reg52.h>
void delay(unsigned int t) // 延时函数
{
unsigned int i,j;
for(i=0;i<t;i++)
for(j=0;j<120;j++);
}
void main()
{
while(1)
{
P1=0x01; // 第一个LED点亮
delay(500); // 延时
P1=0x02; // 第二个LED点亮
delay(500); // 延时
P1=0x04; // 第三个LED点亮
delay(500); // 延时
P1=0x08; // 第四个LED点亮
delay(500); // 延时
P1=0x10; // 第五个LED点亮
delay(500); // 延时
P1=0x20; // 第六个LED点亮
delay(500); // 延时
P1=0x40; // 第七个LED点亮
delay(500); // 延时
P1=0x80; // 第八个LED点亮
delay(500); // 延时
}
}
```
此程序使用P1口控制LED灯,每隔500ms点亮一个LED灯。
相关问题
c语言点亮led灯程序
以下是一个简单的 C 语言程序,可以点亮 LED 灯:
```c
#include <stdio.h>
#include <wiringPi.h>
#define LED_PIN 0
int main(void)
{
wiringPiSetup();
pinMode(LED_PIN, OUTPUT);
while (1) {
digitalWrite(LED_PIN, HIGH);
delay(1000);
digitalWrite(LED_PIN, LOW);
delay(1000);
}
return 0;
}
```
这个程序使用了 wiringPi 库来控制 GPIO 引脚,将 LED 灯点亮和熄灭。在这个程序中,我们使用了一个 while 循环来不断地点亮和熄灭 LED 灯,每次点亮和熄灭的时间间隔为 1 秒。
51单片机点亮一个led灯c语言代码
以下是一个使用C语言编写的51单片机点亮一个LED灯的代码示例:
```c
#include <reg51.h>
sbit LED = P1^0; // 将P1.0引脚定义为LED
void main()
{
LED = 0; // 将LED引脚置为低电平,点亮LED灯
while(1)
{
// 循环保持LED灯点亮状态
}
}
```
这段代码中,我们首先使用`#include <reg51.h>`包含了51单片机的头文件。然后,我们使用`sbit`关键字将P1.0引脚定义为LED,并在`main`函数中将LED引脚置为低电平,从而点亮LED灯。最后,我们使用一个无限循环来保持LED灯的点亮状态。
相关推荐
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)