tlc0832点使用程序
时间: 2024-05-03 21:22:57 浏览: 20
由于您没有提供更多的上下文或背景信息,我们无法确定您是在使用哪个开发平台或语言。但是,下面是一个基于Arduino的示例程序,用于读取TLC0832模数转换器的输出:
```
// 定义引脚
#define CLK 13
#define DOUT 12
#define DIN 11
#define CS 10
void setup() {
pinMode(CLK, OUTPUT);
pinMode(DOUT, INPUT);
pinMode(DIN, OUTPUT);
pinMode(CS, OUTPUT);
Serial.begin(9600);
}
void loop() {
digitalWrite(CS, LOW); // 使片选信号为低电平
digitalWrite(CLK, LOW); // 将时钟线输出低电平
digitalWrite(DIN, HIGH); // 将数字输入线输出高电平
delayMicroseconds(1); // 等待1微秒
digitalWrite(CLK, HIGH); // 将时钟线输出高电平
delayMicroseconds(1); // 等待1微秒
digitalWrite(CLK, LOW); // 将时钟线输出低电平
delayMicroseconds(1); // 等待1微秒
unsigned int adc_result = 0;
for (int i = 0; i < 10; i++) {
digitalWrite(CLK, HIGH); // 将时钟线输出高电平
delayMicroseconds(1); // 等待1微秒
digitalWrite(CLK, LOW); // 将时钟线输出低电平
delayMicroseconds(1); // 等待1微秒
adc_result <<= 1; // 左移一位
adc_result |= digitalRead(DOUT); // 读取数据线状态并保存到adc_result中
}
digitalWrite(CS, HIGH); // 禁用片选信号
Serial.print("ADC Result: ");
Serial.println(adc_result);
delay(500);
}
```
此代码使用Arduino的数字引脚11、12、13和10连接到TLC0832模数转换器,将其设置为输入模式,并在每次循环中读取模数转换器的输出。结果将打印到串口监视器中,并在每次读取之间延迟500毫秒。请注意,此示例程序仅供参考,您需要根据您的具体情况进行调整。
相关推荐
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)