多个MAX1241串联怎么用程序片选
时间: 2023-08-14 13:05:07 浏览: 53
MAX1241是一款12位精度的ADC芯片,如果要多个MAX1241串联,需要使用多个片选信号。程序片选的实现方式取决于使用的控制器和编程语言。一般来说,可以使用控制器的GPIO口来控制片选信号,实现多个MAX1241的片选控制。下面是一个使用STM32控制器和C语言编写的示例代码:
```
#include "stm32f10x.h"
#define MAX1241_CS1_GPIO_PORT GPIOA
#define MAX1241_CS1_GPIO_PIN GPIO_Pin_1
#define MAX1241_CS2_GPIO_PORT GPIOA
#define MAX1241_CS2_GPIO_PIN GPIO_Pin_2
int main(void)
{
// 初始化GPIO口
GPIO_InitTypeDef GPIO_InitStructure;
GPIO_InitStructure.GPIO_Pin = MAX1241_CS1_GPIO_PIN;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(MAX1241_CS1_GPIO_PORT, &GPIO_InitStructure);
GPIO_InitStructure.GPIO_Pin = MAX1241_CS2_GPIO_PIN;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(MAX1241_CS2_GPIO_PORT, &GPIO_InitStructure);
// 选择第一个MAX1241
GPIO_ResetBits(MAX1241_CS1_GPIO_PORT, MAX1241_CS1_GPIO_PIN);
// 进行ADC采样
// 取消选择第一个MAX1241
GPIO_SetBits(MAX1241_CS1_GPIO_PORT, MAX1241_CS1_GPIO_PIN);
// 选择第二个MAX1241
GPIO_ResetBits(MAX1241_CS2_GPIO_PORT, MAX1241_CS2_GPIO_PIN);
// 进行ADC采样
// 取消选择第二个MAX1241
GPIO_SetBits(MAX1241_CS2_GPIO_PORT, MAX1241_CS2_GPIO_PIN);
while (1)
{
}
}
```
在上面的示例代码中,我们分别定义了两个GPIO口来控制两个MAX1241的片选信号,然后在进行ADC采样前分别选择对应的MAX1241,完成采样后再取消选择。这样就可以实现多个MAX1241的片选控制了。