stm32f103串口通信
时间: 2023-09-09 07:11:02 浏览: 63
嗨!您对STM32F103的串口通信感兴趣吗?我可以为您提供一些基本信息。
STM32F103是STMicroelectronics推出的一款基于ARM Cortex-M3内核的微控制器。它具有丰富的外设和强大的性能,适用于各种应用领域,包括通信、工业控制、汽车电子等。
在STM32F103中,串口通信可以通过USART(通用异步收发器)外设实现。USART提供了功能强大的串行通信接口,支持多种通信协议,包括UART、SPI、LIN、IrDA等。
要在STM32F103上实现串口通信,您需要进行以下步骤:
1. 配置GPIO引脚:选择合适的引脚作为串口的数据线(TX和RX)。使用库函数或直接操作寄存器来配置引脚功能和模式。
2. 配置USART外设:选择合适的USART外设,并配置波特率、数据位数、停止位等参数。可以使用库函数或直接操作寄存器来配置USART。
3. 发送和接收数据:使用库函数或直接操作寄存器来发送和接收数据。您可以使用中断或轮询方式进行数据传输。
以下是一个简单的示例代码,实现了STM32F103串口发送字符串的功能:
```c
#include "stm32f10x.h"
void USART1_Init(void)
{
RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1 | RCC_APB2Periph_GPIOA, ENABLE);
GPIO_InitTypeDef GPIO_InitStructure;
USART_InitTypeDef USART_InitStructure;
// 配置USART1的引脚
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9; // TX
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
GPIO_Init(GPIOA, &GPIO_InitStructure);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10; // RX
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
GPIO_Init(GPIOA, &GPIO_InitStructure);
// 配置USART1的参数
USART_InitStructure.USART_BaudRate = 9600;
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
USART_InitStructure.USART_StopBits = USART_StopBits_1;
USART_InitStructure.USART_Parity = USART_Parity_No;
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
USART_InitStructure.USART_Mode = USART_Mode_Tx | USART_Mode_Rx;
USART_Init(USART1, &USART_InitStructure);
// 使能USART1
USART_Cmd(USART1, ENABLE);
}
void USART1_SendString(char* str)
{
while (*str)
{
while (USART_GetFlagStatus(USART1, USART_FLAG_TXE) == RESET); // 等待发送缓冲区为空
USART_SendData(USART1, *str++);
}
}
int main(void)
{
USART1_Init();
while (1)
{
USART1_SendString("Hello, World!\r\n");
// 延时
for (int i = 0; i < 1000000; i++);
}
}
```
这是一个简单的示例,初始化了USART1,并在主循环中以固定时间间隔发送字符串。您可以根据需要进行修改和扩展。
希望这能对您有所帮助!如有任何问题,请随时提问。