centos8双网卡绑定
时间: 2024-09-09 13:14:29 浏览: 41
CentOS 8 中的网络双链路绑定(也称为负载均衡或多路径I/O)通常通过系统配置和网络工具来实现,特别是使用IPVS(IP Virtual Server)或者bonding模块。以下是设置双网卡绑定的基本步骤:
1. **安装相关软件包**:
安装 `iproute2`、`ipvsadm` 及 `libvirtd`(如果在虚拟机上)等必要的网络管理工具包。
```bash
sudo yum install iproute2 ipvsadm bridge-utils
```
2. **创建 bond 接口**:
创建一个新的 bond 接口,比如 `bond0`,连接两个物理网卡(例如 eth0 和 eth1):
```bash
sudo vi /etc/modprobe.d/bonding.conf
blacklist bonding
options bonding mode=balance-rr
sudo modprobe bonding
sudo vi /etc/sysconfig/network-scripts/ifcfg-bond0
DEVICE=bond0
TYPE=bond
BOOTPROTO=dhcp
BONDING_MASTER=yes
SLAVE Dev=eth0
SLAVE Dev=eth1
```
这里使用的是 round-robin(轮询)模式,可根据需求选择其他模式,如 `active-backup` 或 `broadcast`.
3. **启用并激活 bond0**:
```bash
sudo systemctl restart networking
ifdown bond0; ifup bond0
```
4. **配置 IPVS 负载均衡**:
如果需要使用 IPVS,可以在 `/etc/ipvs.config` 配置服务器组(server pool),指向 bond0 的 IP 地址。
5. **测试和监控**:
使用命令行工具如 `ethtool` 检查 bond 状态,`ip addr` 查看接口配置,`ipvsadm -L` 显示当前 IPVS 转发规则。