ENSP CE 配置VXLAN
时间: 2024-04-13 22:20:53 浏览: 14
要在 ENSP CE 上配置 VXLAN,需要进行以下步骤:
1. 创建 VXLAN 实例
2. 配置 VXLAN 实例的基本属性,如 VXLAN ID、VNI、VXLAN 网络地址等
3. 配置 VXLAN 实例的隧道属性,如隧道类型、隧道 IP 地址等
4. 配置 VXLAN 实例的接口属性,如绑定物理接口、配置 VLAN 等
5. 配置路由,使得 VXLAN 实例能够与其他网络通信
相关问题
ENSP配置VXLAN
要在ENSP上配置VXLAN,需要进行以下步骤:
1. 创建VXLAN实例
```
[ENSP] vxlan instance instance-name
[ENSP-vxlan-instance-instance-name] quit
```
2. 创建VXLAN通道
```
[ENSP] interface vxlan-channel channel-id
[ENSP-Vxlan-channel-channel-id] quit
```
3. 配置VXLAN通道的远端IP地址
```
[ENSP] interface vxlan-channel channel-id
[ENSP-Vxlan-channel-channel-id] remote ip-address
[ENSP-Vxlan-channel-channel-id] quit
```
4. 配置VXLAN通道的本地VNI和远端VNI
```
[ENSP] interface vxlan-channel channel-id
[ENSP-Vxlan-channel-channel-id] vni local-vni remote-vni
[ENSP-Vxlan-channel-channel-id] quit
```
5. 配置VXLAN通道的本地IP地址
```
[ENSP] interface vxlan-channel channel-id
[ENSP-Vxlan-channel-channel-id] source ip-address
[ENSP-Vxlan-channel-channel-id] quit
```
6. 将VXLAN通道绑定到物理接口上
```
[ENSP] interface interface-type interface-number
[ENSP-interface-interface-type-interface-number] portswitch
[ENSP-interface-interface-type-interface-number] undo portswitch vlan vlan-id
[ENSP-interface-interface-type-interface-number] vxlan tunnel select channel-id
[ENSP-interface-interface-type-interface-number] quit
```
ensp使用vxlan数据中心网络架构
VXLAN是一种用于虚拟化数据中心网络的技术,可以扩展虚拟网络ID(VNI)的数量,从而支持更多的虚拟网络。下面是使用华为eNSP模拟器实现VXLAN数据中心网络架构的步骤:
1. 创建拓扑:使用eNSP创建三个交换机和两个主机,将它们连接起来。
2. 配置VXLAN:在每个交换机上配置VXLAN,包括VXLAN隧道接口、VXLAN组播地址、VXLAN VNI等。
3. 配置IP地址:为每个主机配置IP地址,并将其添加到相应的VXLAN VNI中。
4. 测试:使用ping命令测试主机之间的连通性,确保VXLAN网络正常工作。
下面是一个简单的示例代码,演示如何在eNSP中配置VXLAN:
```shell
# 创建VXLAN隧道接口
interface Vxlan1
tunnel-mode vxlan
source 10.1.1.1
vxlan vni 1001
vxlan multicast-group 239.1.1.1
# 配置VXLAN VNI
vlan batch 1001
#
interface Vlanif1001
ip address 192.168.1.1 24
vxlan vni 1001
#
interface Vlanif1002
ip address 192.168.2.1 24
vxlan vni 1002
# 配置主机IP地址
interface GigabitEthernet0/0/1
port link-type access
port default vlan 1001
#
interface GigabitEthernet0/0/2
port link-type access
port default vlan 1002
#
interface Vlanif1001
ip address 192.168.1.2 24
#
interface Vlanif1002
ip address 192.168.2.2 24
```