HAL_ADC_START_DMA
时间: 2023-08-07 13:05:14 浏览: 101
引用和中的代码段显示了在STM32开发板上使用HAL库进行ADC数据采集的主函数代码。其中,`HAL_ADC_Start_DMA`是一个函数,用于启动DMA传输,并开始连续转换模式的ADC数据采集。
在引用的代码中,`HAL_ADC_Start_DMA(&hadc1,(uint32_t*)&AD_Value,5)`表示启动ADC1的DMA传输,并设置DMA传输的目标地址为`AD_Value`数组,传输5个数据。
在引用的代码中,`HAL_ADC_Start_DMA(&hadc1, (uint32_t *)AdcBuf, 15)`表示启动ADC1的DMA传输,并设置DMA传输的目标地址为`AdcBuf`数组,传输15个数据。
综上所述,`HAL_ADC_Start_DMA`函数用于启动ADC的DMA传输,并设置DMA传输的目标地址和传输长度。在调用该函数后,ADC将开始使用DMA进行连续转换模式的数据采集。
相关问题
HAL_ADC_Start_DMA
HAL_ADC_Start_DMA is a function in the HAL library for STM32 microcontrollers that starts the ADC conversion process using DMA (Direct Memory Access).
When the ADC is started with DMA, the converted data is automatically transferred to a memory buffer without CPU intervention. This reduces the load on the CPU and allows for more efficient and faster data transfer.
The function takes as parameters the ADC handle (which specifies the ADC module to use), the memory buffer to store the converted data, the number of elements in the buffer, and the DMA transfer mode.
Here is an example usage of HAL_ADC_Start_DMA:
```
uint16_t adc_buffer[100];
HAL_ADC_Start_DMA(&hadc1, (uint32_t*)adc_buffer, 100);
```
This code starts the ADC conversion process using DMA with ADC module 1 and stores the converted data in the adc_buffer array. The array has 100 elements (assuming each conversion returns a 16-bit value).
HAL_ADC_Start_DMA的时序
HAL_ADC_Start_DMA函数用于启动ADC的DMA转换,并在转换完成时触发中断。它的时序如下:
1. 首先,确保已经初始化了ADC和DMA,包括配置ADC的通道和分辨率,以及配置DMA的数据流、传输方向和缓冲区。
2. 调用HAL_ADC_Start_DMA函数来启动DMA转换。该函数的参数包括ADC句柄、DMA缓冲区和缓冲区大小。
3. 在启动DMA转换后,ADC会开始进行转换,并将转换结果存储到DMA缓冲区中。同时,DMA会根据配置的传输方向和缓冲区大小,将转换结果从ADC传输到缓冲区。
4. 当DMA传输完成时,会触发DMA传输完成中断。在中断处理函数中,可以对转换结果进行处理或者进行下一次转换。
总结起来,HAL_ADC_Start_DMA函数的时序是:初始化ADC和DMA -> 调用HAL_ADC_Start_DMA函数启动DMA转换 -> ADC开始转换并将结果存储到DMA缓冲区 -> DMA传输完成触发中断 -> 在中断处理函数中进行后续操作。
需要注意的是,在调用HAL_ADC_Start_DMA函数之前,需要进行相应的初始化配置,并确保DMA缓冲区的大小足够存储转换结果。另外,还需要在中断处理函数中及时处理转换结果,避免数据溢出或错位。