写一段基于32F103通过RS232芯片进行通信的程序
时间: 2024-04-13 09:28:32 浏览: 20
当然,下面是一个基于32F103通过RS232芯片进行通信的简单示例程序:
```c
#include "stm32f10x.h"
void USART1_Init(void)
{
// 启用USART1和GPIOA的时钟
RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1 | RCC_APB2Periph_GPIOA, ENABLE);
GPIO_InitTypeDef GPIO_InitStruct;
USART_InitTypeDef USART_InitStruct;
// 配置USART1引脚
GPIO_InitStruct.GPIO_Pin = GPIO_Pin_9; // TX引脚
GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_AF_PP;
GPIO_Init(GPIOA, &GPIO_InitStruct);
GPIO_InitStruct.GPIO_Pin = GPIO_Pin_10; // RX引脚
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_IN_FLOATING;
GPIO_Init(GPIOA, &GPIO_InitStruct);
// 配置USART1
USART_InitStruct.USART_BaudRate = 9600;
USART_InitStruct.USART_WordLength = USART_WordLength_8b;
USART_InitStruct.USART_StopBits = USART_StopBits_1;
USART_InitStruct.USART_Parity = USART_Parity_No;
USART_InitStruct.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
USART_InitStruct.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
USART_Init(USART1, &USART_InitStruct);
// 启用USART1
USART_Cmd(USART1, ENABLE);
}
void USART1_SendChar(uint8_t ch)
{
while (USART_GetFlagStatus(USART1, USART_FLAG_TXE) == RESET)
; // 等待发送缓冲区为空
USART_SendData(USART1, ch);
}
uint8_t USART1_ReceiveChar(void)
{
while (USART_GetFlagStatus(USART1, USART_FLAG_RXNE) == RESET)
; // 等待接收缓冲区非空
return USART_ReceiveData(USART1);
}
int main(void)
{
// 初始化串口
USART1_Init();
while (1)
{
// 发送数据
USART1_SendChar('H');
USART1_SendChar('e');
USART1_SendChar('l');
USART1_SendChar('l');
USART1_SendChar('o');
USART1_SendChar('\n');
// 接收数据
uint8_t receivedData = USART1_ReceiveChar();
}
}
```
请注意,此示例代码仅用于演示基本的USART通信功能,您可能需要根据您的具体需求进行适当的修改和扩展。此外,请确保已正确配置STM32F103的时钟和引脚,并根据您使用的开发板和外部电路进行适当的设置。