分别给出"bsp_led.h"bsp_usart.hbsp_oled.hbsp_wifi.hbsp_hcsr04.h
时间: 2023-08-04 12:03:25 浏览: 64
好的,以下是这些头文件的简单示例代码:
bsp_led.h:
```
#ifndef __BSP_LED_H__
#define __BSP_LED_H__
#define LED1_GPIO_CLK RCC_APB2Periph_GPIOB
#define LED1_GPIO_PORT GPIOB
#define LED1_GPIO_PIN GPIO_Pin_0
#define LED2_GPIO_CLK RCC_APB2Periph_GPIOB
#define LED2_GPIO_PORT GPIOB
#define LED2_GPIO_PIN GPIO_Pin_1
void BSP_LED_Init(void);
void BSP_LED_Toggle(uint16_t led);
#endif /* __BSP_LED_H__ */
```
bsp_usart.h:
```
#ifndef __BSP_USART_H__
#define __BSP_USART_H__
#define USART1_GPIO_CLK RCC_APB2Periph_GPIOA
#define USART1_GPIO_PORT GPIOA
#define USART1_GPIO_TX_PIN GPIO_Pin_9
#define USART1_GPIO_RX_PIN GPIO_Pin_10
#define USART1_CLK RCC_APB2Periph_USART1
#define USART1_BAUDRATE 115200
void BSP_USART_Init(void);
void BSP_USART_SendByte(uint8_t byte);
void BSP_USART_SendString(char* str);
#endif /* __BSP_USART_H__ */
```
bsp_oled.h:
```
#ifndef __BSP_OLED_H__
#define __BSP_OLED_H__
#define OLED_WIDTH 128
#define OLED_HEIGHT 64
void BSP_OLED_Init(void);
void BSP_OLED_ShowString(uint8_t x, uint8_t y, char *str);
#endif /* __BSP_OLED_H__ */
```
bsp_wifi.h:
```
#ifndef __BSP_WIFI_H__
#define __BSP_WIFI_H__
#define WIFI_SSID "your_ssid"
#define WIFI_PASSWD "your_passwd"
void BSP_WIFI_Init(void);
void BSP_WIFI_Connect(void);
#endif /* __BSP_WIFI_H__ */
```
bsp_hcsr04.h:
```
#ifndef __BSP_HC_SR04_H__
#define __BSP_HC_SR04_H__
#define HCSR04_GPIO_CLK RCC_APB2Periph_GPIOB
#define HCSR04_GPIO_PORT GPIOB
#define HCSR04_GPIO_TRIG_PIN GPIO_Pin_0
#define HCSR04_GPIO_ECHO_PIN GPIO_Pin_1
void BSP_HC_SR04_Init(void);
uint32_t BSP_HC_SR04_GetDistance(void);
#endif /* __BSP_HC_SR04_H__ */
```
这些头文件定义了相关的宏定义和函数声明,具体的实现需要根据实际硬件和需求进行编写。