基于hx711的电子秤结构
时间: 2023-05-17 14:03:57 浏览: 76
非常感谢您的提问。基于hx711的电子秤结构通常由称重传感器、HX711模块、微控制器和显示屏等组成。称重传感器用于检测物体的重量,HX711模块用于放大传感器输出的信号,微控制器用于处理信号并控制显示屏显示重量。具体的电子秤结构可以根据实际需求进行设计和调整。如果您需要更详细的信息,请告诉我。
相关问题
hx711电子秤c51代码
以下是HX711电子秤C51代码的示例:
```c
#include <reg52.h>
#include <intrins.h>
#define DOUT P2_7
#define SCK P2_6
typedef unsigned char uchar;
typedef unsigned int uint;
sbit led = P1^0;
void delay_us(uint us)
{
while(us--)
{
_nop_();
_nop_();
_nop_();
_nop_();
}
}
void delay_ms(uint ms)
{
while(ms--)
{
delay_us(1000);
}
}
uchar HX711_Read(void)
{
uchar i, dat = 0;
DOUT = 1;
SCK = 0;
delay_us(1);
DOUT = 0;
delay_us(1);
SCK = 1;
delay_us(1);
DOUT = 1;
delay_us(1);
for(i = 0; i < 8; i++)
{
SCK = 0;
delay_us(1);
SCK = 1;
dat <<= 1;
dat |= DOUT;
delay_us(1);
}
SCK = 0;
delay_us(1);
dat ^= 0x80;
return dat;
}
void main()
{
uint weight = 0;
uchar i;
while(1)
{
weight = 0;
for(i = 0; i < 10; i++)
{
weight += HX711_Read();
}
if(weight > 0)
{
led = 0;
}
else
{
led = 1;
}
delay_ms(100);
}
}
```
arduino hx711电子秤代码
以下是一个简单的Arduino HX711电子秤代码示例:
```
#include "HX711.h"
HX711 scale;
void setup() {
Serial.begin(960);
scale.begin(LOADCELL_DOUT_PIN, LOADCELL_SCK_PIN);
scale.set_scale(CALIBRATION_FACTOR);
scale.tare(); // Reset the scale to
}
void loop() {
float weight = scale.get_units();
Serial.print("Weight: ");
Serial.print(weight);
Serial.println(" g");
delay(100);
}
```
其中,LOADCELL_DOUT_PIN和LOADCELL_SCK_PIN是HX711模块的数据和时钟引脚,CALIBRATION_FACTOR是校准因子,可以通过称量已知重量的物品来确定。在setup函数中,我们初始化了HX711模块并进行了校准和归零操作。在loop函数中,我们读取当前重量并将其打印到串口监视器中,然后延迟1秒钟。