epm1270t144c5n管脚图
时间: 2023-10-05 13:07:32 浏览: 36
EPM1270T144C5N是一款Altera(现在是Intel)公司生产的Cyclone II系列的FPGA芯片。它具有144引脚,其中包括不同类型的输入输出引脚、时钟引脚、电源引脚等。由于我是语言模型AI,无法直接提供图片或链接,你可以通过在搜索引擎中输入"EPM1270T144C5N管脚图"来查找相关的资源和文档。
相关问题
用EPM1270T144C5设计两组交通灯的fpga代码
由于交通灯控制的逻辑比较简单,可以使用Verilog语言编写FPGA代码。
以下是一个简单的Verilog代码示例,用于控制两组交通灯:
```verilog
module traffic_light (
input clk,
output reg red1,
output reg yellow1,
output reg green1,
output reg red2,
output reg yellow2,
output reg green2
);
reg [1:0] state1;
reg [1:0] state2;
parameter RED = 2'b00;
parameter YELLOW = 2'b01;
parameter GREEN = 2'b10;
always @(posedge clk) begin
// 状态机1
case (state1)
RED: begin
red1 = 1;
yellow1 = 0;
green1 = 0;
state1 = GREEN;
end
YELLOW: begin
red1 = 0;
yellow1 = 1;
green1 = 0;
state1 = RED;
end
GREEN: begin
red1 = 0;
yellow1 = 0;
green1 = 1;
state1 = YELLOW;
end
endcase
// 状态机2
case (state2)
RED: begin
red2 = 1;
yellow2 = 0;
green2 = 0;
state2 = GREEN;
end
YELLOW: begin
red2 = 0;
yellow2 = 1;
green2 = 0;
state2 = RED;
end
GREEN: begin
red2 = 0;
yellow2 = 0;
green2 = 1;
state2 = YELLOW;
end
endcase
end
initial begin
state1 = RED;
state2 = GREEN;
end
endmodule
```
在这个例子中,状态机1和状态机2分别控制两组交通灯的状态。每个状态机都有三个状态:红灯、黄灯和绿灯。每次时钟上升沿时,状态机的输出会改变,从而控制交通灯的状态。
在FPGA开发工具中,可以将这个Verilog代码编译成位流文件,然后加载到EPM1270T144C5器件中。需要根据具体的硬件连接和时钟频率进行适当的修改。
在实验板8*8点阵稳定显示红色心形图案,实验板输入时钟选50MHz,实验板用EPM1270T144C5芯片。根据以上题目提供能在Quartus中运行的VHDL代码
以下是一个简单的VHDL代码示例,实现了在8x8点阵上稳定显示红色心形图案。
```vhdl
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity heart_display is
port (
clk : in std_logic;
rst : in std_logic;
led : out std_logic_vector(7 downto 0)
);
end entity;
architecture rtl of heart_display is
signal row : unsigned(2 downto 0);
signal col : unsigned(2 downto 0);
signal counter : unsigned(23 downto 0) := (others => '0');
signal pattern : std_logic_vector(63 downto 0) := x"3C42818181423C00";
begin
process (clk, rst)
begin
if (rst = '1') then
counter <= (others => '0');
row <= x"0";
col <= x"0";
elsif rising_edge(clk) then
if (counter = to_unsigned(500000, 24) - 1) then
counter <= (others => '0');
col <= col + 1;
if (col = "1000") then
col <= x"0";
row <= row + 1;
if (row = "1000") then
row <= x"0";
end if;
end if;
else
counter <= counter + 1;
end if;
end if;
end process;
with row select
led <= pattern(to_integer(unsigned(col))) & "00000000" when "000",
pattern(to_integer(unsigned(col)) + 8) & "00000000" when "001",
pattern(to_integer(unsigned(col)) + 16) & "00000000" when "010",
pattern(to_integer(unsigned(col)) + 24) & "00000000" when "011",
pattern(to_integer(unsigned(col)) + 32) & "00000000" when "100",
pattern(to_integer(unsigned(col)) + 40) & "00000000" when "101",
pattern(to_integer(unsigned(col)) + 48) & "00000000" when "110",
pattern(to_integer(unsigned(col)) + 56) & "00000000" when "111",
(others => '0') when others;
end architecture;
```
该代码中使用了一个计数器来控制LED点阵中的行和列扫描,同时根据扫描到的行来选择相应的图案。其中`pattern`变量存储了心形图案的二进制表示形式。请注意,该代码仅供参考,可能需要根据具体实验板和LED点阵的接口进行修改。