boundry = (1<<31) -1 if x>0 else 1<<31
时间: 2024-03-21 12:09:42 浏览: 10
这个代码片段是使用了条件表达式来对变量 `boundry` 进行赋值。它的含义是,如果变量 `x` 大于 0,那么 `boundry` 的值将被设为 `(1<<31) - 1`,否则 `boundry` 的值将被设为 `1<<31`。
在这段代码中,`<<` 是位运算符,表示将一个数的二进制表示向左移动指定的位数。`1<<31` 表示将二进制数 1 向左移动 31 位,即得到一个只有最高位为 1,其余位均为 0 的数。
因此,这段代码的目的是根据变量 `x` 的值来设置一个边界值,如果 `x` 大于 0,则边界值为 `(1<<31) - 1`,否则边界值为 `1<<31`。这样可以确保 `boundry` 的值不会超过 32 位整数的范围。
相关问题
ff_init_cabac_decoder(CABACContext *c, const uint8_t *buf, int buf_size) { c->bytestream_start= c->bytestream= buf; c->bytestream_end= buf + buf_size; c->low = (*c->bytestream++)<<18; c->low+= (*c->bytestream++)<<10; // Keep our fetches on a 2-byte boundry as this should avoid ever having to // do unaligned loads if the compiler (or asm) optimises the double byte // load into a single instruction if(((uintptr_t)c->bytestream & 1) == 0) { c->low += (1 << 9); } else { c->low += ((*c->bytestream++) << 2) + 2; } c->range= 0x1FE; if ((c->range<<(CABAC_BITS+1)) < c->low) return AVERROR_INVALIDDATA; return 0;
这是FFmpeg中H.264和H.265解码器中用于初始化CABAC解码器的函数ff_init_cabac_decoder()的代码。该函数的输入参数包括CABAC上下文结构体CABACContext,二进制数据缓冲区buf,以及缓冲区大小buf_size。函数主要实现了对CABAC解码器上下文的初始化,包括设置二进制数据缓冲区的起始位置、结束位置,以及初始化CABAC解码器的状态变量及初始值。
具体来说,该函数首先将二进制数据缓冲区的起始位置、结束位置等信息保存到CABACContext结构体中。然后,函数从二进制数据缓冲区中读取两个字节的数据,将其分别左移18位和10位,并将结果相加,得到CABAC解码器状态变量low的初始值。接着,函数检查CABAC解码器的位置是否为2的倍数,如果是,则在low的低9位加1,否则在low的低2位加上下一个字节的值加2。最后,函数将CABAC解码器状态变量range的初始值设为0x1FE,并检查range和low的初始值是否满足解码的条件,如果不满足,则返回AVERROR_INVALIDDATA。
总的来说,ff_init_cabac_decoder()函数是CABAC解码器的初始化函数,用于初始化CABAC解码器的状态变量及初始值,为后续的解码操作做好准备。
给我用C语言写一个二叉树的遍历
我可以给你一个例子: #include <stdio.h>
struct node
{
int data;
struct node *left, *right;
}; /* function to print leaf nodes of a binary tree*/
void printLeaves(struct node* root)
{
if ( root != NULL )
{
printLeaves(root->left);
// 如果节点为叶子节点,则打印
if ( root->left == NULL && root->right == NULL )
printf("%d ", root->data);
printLeaves(root->right);
}
}
/* function to print left boundry of a binary tree*/
void printBoundaryLeft(struct node* root)
{
if ( root != NULL )
{
if ( root->left )
{
// to ensure top down order, print the node
// before calling itself for left subtree
printf("%d ", root->data);
printBoundaryLeft(root->left);
}
else if( root->right )
{
printf("%d ", root->data);
printBoundaryLeft(root->right);
}
}
} /* function to print right boundry of a binary tree */
void printBoundaryRight(struct node* root)
{
if ( root != NULL )
{
if ( root->right )
{
// to ensure bottom up order, first call for
// right subtree, then print this node
printBoundaryRight(root->right);
printf("%d ", root->data);
}
else if ( root->left )
{
printBoundaryRight(root->left);
printf("%d ", root->data);
}
}
} /* A function to do boundary traversal of a given binary tree*/
void printBoundary (struct node* root)
{
if (root)
{
printf("%d ",root->data);
// 先遍历左边界
printBoundaryLeft(root->left);
// 再遍历叶子节点
printLeaves(root->left);
printLeaves(root->right);
// 最后遍历右边界
printBoundaryRight(root->right);
}
}