wifi.mode(wifi_sta);
时间: 2023-08-29 11:02:23 浏览: 158
wifi.mode(wifi_sta) 是一个ESP8266的WiFi库函数,用于设置WiFi模式为站点 (station) 模式。
在ESP8266中,有三种可选的WiFi模式:透传模式 (promiscuous),软AP模式 (softAP) 和站点模式 (station)。其中,站点模式是最常用的模式之一。
将WiFi模式设置为站点模式,意味着ESP8266将作为一个客户端连接到路由器或者其他的访问点。这样ESP8266就可以接入互联网,并通过网络连接到其他设备或者服务器。
当调用wifi.mode(wifi_sta)函数时,ESP8266就会切换到站点模式。随后,你可以使用WiFi库中的其他函数来扫描可用的无线网络、连接到指定的网络、发送和接收数据等操作。
通过设置WiFi模式为站点模式,ESP8266就可以像智能手机一样连接到互联网,从而实现网络通信、访问远程服务器以及利用各种云服务等功能。
相关问题
wifi_config_t wifi_config = { .sta = { .ssid = EXAMPLE_ESP_WIFI_SSID, .password = EXAMPLE_ESP_WIFI_PASS, /* Authmode threshold resets to WPA2 as default if password matches WPA2 standards (pasword len => 8). * If you want to connect the device to deprecated WEP/WPA networks, Please set the threshold value * to WIFI_AUTH_WEP/WIFI_AUTH_WPA_PSK and set the password with length and format matching to * WIFI_AUTH_WEP/WIFI_AUTH_WPA_PSK standards. */ .threshold.authmode = ESP_WIFI_SCAN_AUTH_MODE_THRESHOLD, .sae_pwe_h2e = WPA3_SAE_PWE_BOTH, }, };详细注释这段代码
这段代码是用于 ESP32 系列芯片的 WiFi 连接配置,其中 `wifi_config_t` 是一个结构体类型,具体定义在 ESP-IDF 的 `esp_wifi_types.h` 文件中。该结构体包含了 WiFi 连接的各种配置信息。
接下来是对该代码段的详细注释:
```c
wifi_config_t wifi_config = { // 定义一个 WiFi 连接配置结构体并初始化
.sta = { // 设置 STA(Station)模式的配置
.ssid = EXAMPLE_ESP_WIFI_SSID, // 设置要连接的 WiFi 热点 SSID
.password = EXAMPLE_ESP_WIFI_PASS, // 设置要连接的 WiFi 热点密码
/* Authmode threshold resets to WPA2 as default if password matches WPA2 standards (pasword len => 8).
* 如果密码符合 WPA2 标准(密码长度 >= 8),则认证模式会重置为 WPA2。
* 如果要连接已经废弃的 WEP/WPA 网络,请将认证模式的阈值设置为 WIFI_AUTH_WEP 或 WIFI_AUTH_WPA_PSK,
* 并将密码设置为符合 WIFI_AUTH_WEP 或 WIFI_AUTH_WPA_PSK 标准的长度和格式。
*/
.threshold.authmode = ESP_WIFI_SCAN_AUTH_MODE_THRESHOLD,
.sae_pwe_h2e = WPA3_SAE_PWE_BOTH, // 设置 WPA3 SAE 的密码验证方式
},
};
```
总的来说,该段代码的作用是定义一个 `wifi_config_t` 类型的结构体变量 `wifi_config`,并初始化其中的 `sta` 成员,用于设置 ESP32 芯片的 WiFi 连接参数,其中包括要连接的 WiFi 热点的 SSID、密码、认证模式以及密码验证方式等。
esp32使用WiFi.mode() 关闭WiFi后怎么重新打开
要重新打开ESP32的WiFi,您可以使用`WiFi()`函数将其设置为所需的式,然后调用`WiFi.begin()`函数连接到WiFi网络。以下是一个示例代码:
```cpp
#include <WiFi.h>
void setup() {
// 初始化串口和WiFi
Serial.begin(115200);
WiFi.mode(WIFI_OFF); // 先关闭WiFi
delay(1000);
WiFi.mode(WIFI_STA); // 设置为Station模式
// 连接到WiFi网络
WiFi.begin("your_SSID", "your_password");
while (WiFi.status() != WL_CONNECTED) {
delay(1000);
Serial.println("Connecting to WiFi...");
}
// 连接成功后显示IP地址
Serial.print("Connected! IP address: ");
Serial.println(WiFi.localIP());
}
void loop() {
// 主循环
}
```
在上面的示例中,首先调用`WiFi.mode(WIFI_OFF)`关闭WiFi,然后延迟1秒钟。接下来,调用`WiFi.mode(WIFI_STA)`将WiFi设置为Station模式。最后,使用`WiFi.begin()`函数连接到您的WiFi网络。您可以将`"your_SSID"`和`"your_password"`替换为您的WiFi网络的名称和密码。
请注意,在重新打开WiFi之前,您需要确保已经关闭了之前的连接。
相关推荐
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![7z](https://img-home.csdnimg.cn/images/20210720083312.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)