FlexIO_I2C的使用步骤
时间: 2023-12-12 13:01:57 浏览: 36
使用 FlexIO_I2C 的步骤如下:
1. 配置硬件引脚:首先,你需要确定使用的 FlexIO 模块和引脚。根据你的硬件平台和需求,选择合适的 FlexIO 模块和引脚,并将其与 I2C 设备连接。
2. 初始化 FlexIO 模块:在代码中,首先需要初始化选择的 FlexIO 模块。这通常涉及到设置 FlexIO 控制寄存器和配置引脚功能。
3. 配置 I2C 通信参数:接下来,你需要配置 I2C 的通信参数,例如时钟速率、传输模式(主模式或从模式)、地址模式等。这些参数可以通过设置对应的寄存器来实现。
4. 发送起始条件:在开始通信之前,需要发送起始条件(Start Condition)。这将启动 I2C 总线并准备发送数据。
5. 发送数据:根据需要,可以通过写入数据寄存器来发送数据。在发送每个字节后,需要等待传输完成。
6. 接收数据:在接收数据之前,需要发送设备地址,并指定读取模式。然后,你可以通过读取数据寄存器来接收数据。
7. 发送停止条件:在通信结束后,需要发送停止条件(Stop Condition)。这会终止 I2C 总线上的通信。
这些步骤是基本的 FlexIO_I2C 使用流程,具体的实现细节可能会因你的硬件平台和需求而有所不同。请参考相关的硬件和软件文档来了解更多细节和示例代码。
相关问题
优化这段代码 uint8_t my_i2c_write(uint8_t reg_addr, uint8_t *txbuff, uint8_t len){ uint8_t buff1[len+1]; status_t status; buff1[0] = reg_addr; for(uint8_t i=1; i<len+1; i++){ buff1[i] = txbuff[i-1]; } FLEXIO_I2C_DRV_MasterInit(INST_FLEXIO_I2C, &flexio_i2c_MasterConfig0, &i2cMasterState); status = FLEXIO_I2C_DRV_MasterSendDataBlocking(&i2cMasterState, buff1, sizeof(buff1), true, 20UL); //打印写寄存器错误时的错误信息 //return_status(status); if(status == STATUS_SUCCESS){ return 0; }else{ return -1; } } uint8_t my_i2c_read(uint8_t reg_addr, uint8_t *rxbuff, uint8_t len){ uint8_t reg[1]; status_t status1; status_t status2; reg[0] = reg_addr; FLEXIO_I2C_DRV_MasterInit(INST_FLEXIO_I2C, &flexio_i2c_MasterConfig0, &i2cMasterState); status1 = FLEXIO_I2C_DRV_MasterSendDataBlocking(&i2cMasterState, reg, 1, false, 10U); //return_status(status1); status2 = FLEXIO_I2C_DRV_MasterReceiveDataBlocking(&i2cMasterState, rxbuff, len, true, 20U); //return_status(status2); /* if(reg_addr == 0x20){ return_status(status1); return_status(status2); printf2("status1=%x\rstatus2=%x\r\n",status1,status2); } */ if((status1 == STATUS_SUCCESS) && (status2 == STATUS_SUCCESS)){ return 0; }else{ return -1; } }
这段代码可以进行以下优化:
1. 在函数内部初始化 I2C 主机的代码可以移到主函数中,避免每次读写寄存器时都要初始化一次,提高效率。
2. 在 my_i2c_write 函数中,可以使用 memcpy 函数将 txbuff 中的数据拷贝到 buff1 中,避免使用 for 循环一个一个赋值的操作。
3. 在 my_i2c_read 函数中,可以将 status1 和 status2 的判断条件合并为一个条件语句,避免使用两个 if 语句判断。
使用S32K312 的Flexio I2C组件进行I2C传输代码
以下是使用S32K312的FlexIO I2C组件进行I2C传输的代码示例:
```c
#include "S32K312.h"
#include "flexio_i2c.h"
#define I2C_BAUDRATE 100000
flexio_i2c_master_t i2c_master;
flexio_i2c_dev_t i2c_device;
void i2c_init(void)
{
FLEXIO_I2C_MasterInit(&i2c_master);
FLEXIO_I2C_MasterSetBaudRate(&i2c_master, I2C_BAUDRATE);
}
void i2c_write(uint8_t addr, uint8_t reg, uint8_t val)
{
i2c_device.address = addr;
i2c_device.data = &val;
i2c_device.dataSize = 1;
i2c_device.regAddr = reg;
i2c_device.regAddrSize = 1;
FLEXIO_I2C_MasterWrite(&i2c_master, &i2c_device);
}
void i2c_read(uint8_t addr, uint8_t reg, uint8_t *val)
{
i2c_device.address = addr;
i2c_device.data = val;
i2c_device.dataSize = 1;
i2c_device.regAddr = reg;
i2c_device.regAddrSize = 1;
FLEXIO_I2C_MasterRead(&i2c_master, &i2c_device);
}
```
使用上述代码,可以实现向指定地址的I2C设备中写入一个字节的数据,或者从指定地址的I2C设备中读取一个字节的数据。需要注意的是,在使用前需要先调用`i2c_init()`函数进行初始化。
相关推荐
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)