esp32 micropython ADC
时间: 2023-08-30 21:11:27 浏览: 68
ESP32是一款强大的微控制器,可以使用Micropython来进行编程。它具有内置的ADC(模数转换器)模块,可以用于读取模拟信号。
在Micropython中,要使用ESP32的ADC模块,需要先导入相应的库。可以使用以下代码:
```python
from machine import ADC
# 创建ADC对象
adc = ADC(0)
# 读取ADC值
adc_value = adc.read()
# 打印读取到的值
print("ADC value:", adc_value)
```
这个例子中,我们创建了一个ADC对象,并指定通道0。然后使用`read()`方法读取ADC值,并将其保存在变量`adc_value`中。最后,我们打印出读取到的值。
需要注意的是,ESP32的ADC通道可以有多个(通常为8个),我们可以根据需要选择不同的通道进行读取。另外,ADC的精度也可以进行设置,默认为12位。你可以根据具体的需求去调整设置。
希望对你有所帮助!如果还有其他问题,请随时提问。
相关问题
esp8266 MicroPython adc输出
好的,我知道了。你的问题是如何在 ESP8266 上使用 MicroPython 输出 ADC (Analog to Digital Converter)的值。
在 ESP8266 上使用 MicroPython 输出 ADC 的值可以使用 machine 模块中的 ADC 类。ADC 类可以初始化一个 ADC 对象,并将其连接到一个 ADC 引脚上。
具体步骤如下:
1. 首先需要在 ESP8266 上安装 MicroPython,然后将模拟信号连接到 ESP8266 上的一个 ADC 引脚。
2. 在 MicroPython 中,使用 ADC 类初始化一个 ADC 对象,并将其连接到相应的 ADC 引脚上。
3. 使用 ADC 对象的 read() 方法读取 ADC 输出值。
下面是一个简单的 MicroPython 代码示例,用于输出 ADC 的值:
```python
from machine import ADC
adc_pin = ADC(0) # 初始化ADC对象,连接到ADC0引脚
while True:
adc_value = adc_pin.read() # 读取ADC输出值
print("ADC Value: %d" % adc_value)
```
上面的代码中,首先使用 ADC 类初始化一个 ADC 对象,将其连接到 ADC0 引脚上。在每次循环中,使用 ADC 对象的 read() 方法读取 ADC 输出值,并将其打印到控制台上。
micropython esp32 ADC
MicroPython is a version of the Python programming language optimized for microcontrollers and embedded systems. It provides a way to run Python code directly on microcontrollers like the ESP32.
The ESP32 is a popular microcontroller module that offers built-in ADC (Analog-to-Digital Converter) functionality. ADC allows you to read analog values from sensors or other external devices.
To use the ADC in MicroPython on the ESP32, you can follow these steps:
1. Import the required modules:
```python
import machine
```
2. Create an ADC object:
```python
adc = machine.ADC(machine.Pin(34))
```
Here, `34` refers to the GPIO pin number on the ESP32 board that is connected to the ADC input.
3. Configure the ADC:
```python
adc.atten(machine.ADC.ATTN_11DB)
adc.width(machine.ADC.WIDTH_12BIT)
```
The `atten` method sets the attenuation level (in dB) for the input voltage range, and `width` sets the resolution of the ADC (number of bits).
4. Read the analog value:
```python
analog_value = adc.read()
```
This reads the analog value from the ADC. The returned value will be in the range of 0 to 4095 (for 12-bit resolution).
You can now use the `analog_value` variable to perform further calculations or use it as needed in your program.
Note: Make sure to refer to the ESP32 board's pinout diagram to determine the correct GPIO pin to use for ADC input.
I hope this helps you get started with reading analog values using MicroPython on the ESP32! Let me know if you have any further questions.