void display(unsigned char num) { unsigned char code digit[] = { 0xC0, // 数字0 0xF9, // 数字1 0xA4, // 数字2 0xB0, // 数字3 0x99, // 数字4 0x92, // 数字5 0x82, // 数字6 0xF8, // 数字7 0x80, // 数字8 0x90 // 数字9 }; P0 = digit[num]; } 每一步都是什么意思
时间: 2024-04-12 08:33:30 浏览: 39
这段代码是用于在数码管上显示数字的函数。下面是对每一步的解释:
1. `unsigned char code digit[] = {...};`:定义了一个数组 `digit`,其中存储了数码管显示每个数字所需的编码。每个元素对应一个数字,在这个例子中,0-9 对应的编码值存储在数组 `digit` 中。
2. `P0 = digit[num];`:根据传入的 `num` 参数的值,通过索引 `digit` 数组来获取对应数字的编码,并将其赋值给 P0 端口。这样就能在数码管上显示相应的数字。
例如,如果你调用 `display(3);`,它会将数字 3 对应的编码 `0xB0` 写入到 P0 端口,从而在数码管上显示数字 3。
数码管的显示是通过控制对应位的引脚电平来实现的。在这段代码中,我们假设数码管的连接方式为共阳极(common anode),即当对应位的引脚为高电平时,该位会被点亮。如果你使用的是共阴极(common cathode)数码管,请根据实际情况进行引脚电平的设置。
相关问题
51单片机数码管显示0~99
对于51单片机,你可以使用数码管来显示0到99的数字。以下是一个简单的示例代码:
```c
#include <reg51.h>
// 数码管段选位定义
sbit segA = P2^0;
sbit segB = P2^1;
sbit segC = P2^2;
sbit segD = P2^3;
sbit segE = P2^4;
sbit segF = P2^5;
sbit segG = P2^6;
sbit segDP = P2^7;
// 数码管位选位定义
sbit digit1 = P3^0;
sbit digit2 = P3^1;
// 数码管显示的数字数组
unsigned char digitCode[10] = {
0xC0, // 显示0
0xF9, // 显示1
0xA4, // 显示2
0xB0, // 显示3
0x99, // 显示4
0x92, // 显示5
0x82, // 显示6
0xF8, // 显示7
0x80, // 显示8
0x90 // 显示9
};
void delay(unsigned int time) {
unsigned int i, j;
for (i = time; i > 0; i--)
for (j = 110; j > 0; j--);
}
void displayNumber(unsigned char num) {
unsigned char num1, num2;
num1 = num / 10; // 十位数
num2 = num % 10; // 个位数
digit1 = 1; // 打开第一个数码管
P1 = digitCode[num1]; // 显示十位数
delay(1);
digit1 = 0; // 关闭第一个数码管
digit2 = 1; // 打开第二个数码管
P1 = digitCode[num2]; // 显示个位数
delay(1);
digit2 = 0; // 关闭第二个数码管
}
void main() {
unsigned char i;
while (1) {
for (i = 0; i < 100; i++) {
displayNumber(i);
delay(1000);
}
}
}
```
这段代码使用了P1口来控制数码管的段选,P2口来控制数码管的位选。通过函数`displayNumber()`来显示数字,函数内部将数字拆分为十位数和个位数,并分别显示在两个数码管上。`delay()`函数用于延时。在`main()`函数中,通过循环显示0到99的数字。
请注意,具体的数码管连接方式可能会有所不同,你需要根据你所使用的具体数码管进行相应的引脚定义和连接。
如何用51单片机按键加减操作数码管显示0-99
以下是基于Keil C的51单片机的按键加减操作数码管显示0-99的代码示例:
```c
#include <reg51.h>
#define DIGIT P0 // 数码管端口定义
#define KEY P1 // 按键端口定义
unsigned char code digitCode[] = { // 数码管显示0-9的编码
0xc0, 0xf9, 0xa4, 0xb0, 0x99,
0x92, 0x82, 0xf8, 0x80, 0x90
};
unsigned char count = 0; // 数值计数器
void delay(unsigned int t) { // 延时函数
unsigned int i, j;
for (i = 0; i < t; i++)
for (j = 0; j < 125; j++);
}
void display(unsigned char num) { // 数码管显示函数
DIGIT = digitCode[num / 10]; // 显示十位
delay(2); // 延时一段时间
DIGIT = digitCode[num % 10]; // 显示个位
delay(2); // 延时一段时间
}
void main() {
KEY = 0xff; // 初始化按键端口为高电平
while (1) {
if (KEY != 0xff) { // 如果有按键按下
delay(10); // 延时去抖
if (KEY != 0xff) { // 确认按键按下
if (KEY == 0xfe) { // 按下加键
count++;
if (count > 99) count = 0; // 数值范围0-99
} else if (KEY == 0xfd) { // 按下减键
if (count > 0) count--;
else count = 99; // 数值范围0-99
}
display(count); // 显示数值
}
while (KEY != 0xff); // 等待按键释放
}
}
}
```
该代码使用了一个计数器变量count来保存数值,并且在按下加键或减键时对该变量进行加减操作,同时限制了数值范围在0-99之间。在主循环中通过调用display函数来实现数码管的显示。其中delay函数用于实现适当的延时以防止显示闪烁。
相关推荐
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![docx](https://img-home.csdnimg.cn/images/20210720083331.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)