how to plumb in a washing machine

1. Choose a location: Select a location that is close to a water supply, a drain, and an electrical outlet. The area should also have enough space for the machine and allow for proper ventilation.

2. Install the water supply: Connect the hot and cold water supply hoses to the back of the washing machine. The hot water is usually colored red and the cold water blue. Connect the other end of the hoses to the water supply valves located on the wall behind the machine.

3. Install the drain hose: Attach the drain hose to the back of the washing machine and secure it in place with a hose clamp. The other end of the hose should be inserted into a drain pipe or standpipe. Make sure the hose is not inserted too far, as this can cause water to siphon out of the machine.

4. Connect the power supply: Plug the power cord into an electrical outlet. If the machine has a grounding wire, connect it to a grounding screw or the metal frame of the machine.

5. Level the machine: Adjust the feet on the bottom of the washing machine until it is level. Use a level to check the machine from side to side and front to back.

6. Run a test cycle: Turn on the water supply and electrical outlet, and run a test cycle to ensure that the machine is working properly. Check for leaks and listen for any unusual noises.

7. Install a lint trap: If your washing machine does not have a built-in lint trap, you may need to install one. This will help prevent lint and other debris from clogging the drain pipe.