stm32adc采集dac的数据_STM32实例DAC数模转换实验
时间: 2023-12-21 19:06:37 浏览: 33
以下是在STM32上进行DAC数模转换实验的示例代码:
```c
#include "stm32f10x.h"
void GPIO_Configuration(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_4;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AIN;
GPIO_Init(GPIOA, &GPIO_InitStructure);
}
void DAC_Configuration(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
DAC_InitTypeDef DAC_InitStructure;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
RCC_APB1PeriphClockCmd(RCC_APB1Periph_DAC, ENABLE);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_5;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AIN;
GPIO_Init(GPIOA, &GPIO_InitStructure);
DAC_InitStructure.DAC_Trigger = DAC_Trigger_None;
DAC_InitStructure.DAC_WaveGeneration = DAC_WaveGeneration_None;
DAC_InitStructure.DAC_OutputBuffer = DAC_OutputBuffer_Enable;
DAC_Init(DAC_Channel_1, &DAC_InitStructure);
DAC_Cmd(DAC_Channel_1, ENABLE);
}
int main(void)
{
RCC_Configuration();
GPIO_Configuration();
DAC_Configuration();
while (1)
{
uint16_t data = ADC_GetConversionValue(ADC1);
DAC_SetChannel1Data(DAC_Align_12b_R, data);
}
}
```
在这个例子中,我们使用了一个ADC输入和一个DAC输出进行数模转换的实验。我们将ADC输入连接到引脚PA4,而DAC输出连接到引脚PA5。
在主函数中,我们首先对GPIO和DAC进行了配置。随后,我们使用一个循环来不断地从ADC中读取数据,并将其传递给DAC进行输出。这样可以让我们在DAC输出的设备上观察到变化的电压。
需要注意的是,这个例子中我们并没有使用DAC的触发器功能,而是通过直接设置DAC数据寄存器的方式进行输出。如果需要使用触发器功能,请参考官方文档进行配置。