相机没有exposure属性怎么调节曝光时间
时间: 2023-10-09 12:11:21 浏览: 50
如果你的相机不支持直接设置曝光时间,你可以考虑通过调节相机的增益来控制曝光时间。增益越高,曝光时间越短,但图像质量可能会受到影响。以下是一个基本的控制相机曝光时间的示例:
```matlab
% 创建视频对象
vid = videoinput('winvideo', 1, 'YUY2_640x480');
% 设置增益
gainValue = 10; % 增益值
src = getselectedsource(vid);
src.Gain = gainValue;
% 开始采集图像
start(vid);
```
上面的代码使用 Windows 平台上的默认视频接口来创建一个视频对象,并设置相机的增益为 10。注意,增益值越高,图像噪声可能会越大。你需要根据自己的情况进行调整。
相关问题
opencv c++ 设定外接相机的曝光时间代码
你可以使用OpenCV的VideoCapture类来控制相机的曝光时间。以下是一个简单示例,展示如何设置相机的曝光时间:
```cpp
#include <opencv2/opencv.hpp>
using namespace cv;
int main(int argc, char** argv)
{
// 打开相机
VideoCapture cap(0);
// 检查相机是否打开成功
if (!cap.isOpened()) {
std::cerr << "Failed to open camera!" << std::endl;
return -1;
}
// 设置曝光时间,单位为毫秒
int exposure_time_ms = 50;
cap.set(CAP_PROP_EXPOSURE, exposure_time_ms);
// 进行视频捕捉
Mat frame;
while (true) {
cap >> frame;
imshow("Camera", frame);
if (waitKey(1) == 27) { // 按下ESC键退出
break;
}
}
// 释放相机
cap.release();
return 0;
}
```
在代码中,首先创建一个VideoCapture对象来打开相机。然后,使用`set()`函数设置CAP_PROP_EXPOSURE属性来控制曝光时间。最后,使用`cap >> frame`捕捉视频帧,并使用`imshow()`函数显示帧。
基于Qt和Media Foundation 框架获取或设置UVC相机属性
获取和设置UVC相机属性可以使用Qt和Media Foundation框架。以下是一些步骤:
1. 首先,需要使用Media Foundation框架来获取UVC相机的属性。在此之前,需要确保已经正确安装了Media Foundation SDK和UVC相机驱动程序。
2. 使用Media Foundation框架中的IMFActivate接口来获取UVC相机设备的属性。可以使用以下代码:
```
IMFAttributes* pAttributes = NULL;
IMFActivate** ppDevices = NULL;
// Create an attribute store to specify the enumeration parameters.
HRESULT hr = MFCreateAttributes(&pAttributes, 1);
if (SUCCEEDED(hr))
{
// Specify the enumeration parameter.
hr = pAttributes->SetGUID(
MF_DEVSOURCE_ATTRIBUTE_SOURCE_TYPE,
MF_DEVSOURCE_ATTRIBUTE_SOURCE_TYPE_VIDCAP_GUID
);
}
if (SUCCEEDED(hr))
{
// Enumerate the devices.
UINT32 count;
hr = MFEnumDeviceSources(pAttributes, &ppDevices, &count);
}
if (SUCCEEDED(hr))
{
// Iterate through the devices and get the properties.
for (UINT32 i = 0; i < count; i++)
{
IMFAttributes* pDeviceAttributes = NULL;
hr = ppDevices[i]->GetAttributes(&pDeviceAttributes);
if (SUCCEEDED(hr))
{
// Get the device name.
WCHAR* pName = NULL;
UINT32 cchName;
hr = ppDevices[i]->GetAllocatedString(MF_DEVSOURCE_ATTRIBUTE_FRIENDLY_NAME, &pName, &cchName);
if (SUCCEEDED(hr))
{
wprintf(L"Device name: %s\n", pName);
CoTaskMemFree(pName);
}
// Get the device ID.
WCHAR* pId = NULL;
UINT32 cchId;
hr = ppDevices[i]->GetAllocatedString(MF_DEVSOURCE_ATTRIBUTE_SOURCE_TYPE_VIDCAP_SYMBOLIC_LINK, &pId, &cchId);
if (SUCCEEDED(hr))
{
wprintf(L"Device ID: %s\n", pId);
CoTaskMemFree(pId);
}
// Get the device attributes.
GUID subtype;
UINT32 width, height, fps;
hr = pDeviceAttributes->GetGUID(MF_MT_SUBTYPE, &subtype);
if (SUCCEEDED(hr))
{
hr = MFGetAttributeSize(pDeviceAttributes, MF_MT_FRAME_SIZE, &width, &height);
}
if (SUCCEEDED(hr))
{
hr = MFGetAttributeRatio(pDeviceAttributes, MF_MT_FRAME_RATE, &fps, 1);
}
if (SUCCEEDED(hr))
{
wprintf(L"Video format: %s, %dx%d, %dfps\n", GetSubtypeName(subtype), width, height, fps);
}
pDeviceAttributes->Release();
}
ppDevices[i]->Release();
}
CoTaskMemFree(ppDevices);
}
pAttributes->Release();
```
3. 上面的代码将枚举UVC相机设备并获取它们的属性,包括设备名称、设备ID和视频格式。可以根据需要设置其他属性,例如曝光时间、增益等。可以使用以下代码设置相机属性:
```
IMFMediaSource* pSource = NULL;
IMFAttributes* pAttributes = NULL;
// Create the media source from the device ID.
hr = MFCreateDeviceSource(pId, &pAttributes, &pSource);
if (SUCCEEDED(hr))
{
// Set the exposure time.
hr = pAttributes->SetUINT64(MF_VIDCAP_CAMERACONTROL_EXPOSURE, exposureTime);
}
if (SUCCEEDED(hr))
{
// Set the gain.
hr = pAttributes->SetUINT64(MF_VIDCAP_CAMERACONTROL_GAIN, gainValue);
}
if (SUCCEEDED(hr))
{
// Set the white balance.
hr = pAttributes->SetUINT32(MF_VIDCAP_CAMERACONTROL_WHITEBALANCE, whiteBalanceValue);
}
// Release the media source and attributes.
pSource->Release();
pAttributes->Release();
```
4. 上面的代码将设置UVC相机的曝光时间、增益和白平衡。可以根据需要设置其他属性。
希望这些代码可以帮助你获取和设置UVC相机属性。