ensp交换机ospf配置

在华为的eNSP（Enterprise Network Simulation Platform）模拟器中，配置交换机和路由器的OSPF（Open Shortest Path First）协议是网络工程师常见的任务。以下是详细的配置步骤：

### 交换机配置
1. **进入系统视图**

   [Huawei] system-view

2. **配置VLAN接口**
假设我们要配置VLAN 10和VLAN 20的接口。

   [Huawei] vlan batch 10 20
   [Huawei] interface Vlanif10
   [Huawei-Vlanif10] ip address 192.168.10.1 255.255.255.0
   [Huawei-Vlanif10] quit
   [Huawei] interface Vlanif20
   [Huawei-Vlanif20] ip address 192.168.20.1 255.255.255.0
   [Huawei-Vlanif20] quit

3. **配置物理接口**
假设我们要配置GigabitEthernet 0/0/1接口为Trunk模式。

   [Huawei] interface GigabitEthernet0/0/1
   [Huawei-GigabitEthernet0/0/1] port link-type trunk
   [Huawei-GigabitEthernet0/0/1] port trunk allow-pass vlan 10 20
   [Huawei-GigabitEthernet0/0/1] quit

4. **配置OSPF**

   [Huawei] ospf 1
   [Huawei-ospf-1] area 0
   [Huawei-ospf-1-area-0.0.0.0] network 192.168.10.0 0.0.0.255
   [Huawei-ospf-1-area-0.0.0.0] network 192.168.20.0 0.0.0.255
   [Huawei-ospf-1-area-0.0.0.0] quit
   [Huawei-ospf-1] quit

### 路由器配置
1. **进入系统视图**

   [Huawei] system-view

2. **配置接口IP地址**
假设我们要配置GigabitEthernet 0/0/0和GigabitEthernet 0/0/1接口。

   [Huawei] interface GigabitEthernet0/0/0
   [Huawei-GigabitEthernet0/0/0] ip address 192.168.10.2 255.255.255.0
   [Huawei-GigabitEthernet0/0/0] quit
   [Huawei] interface GigabitEthernet0/0/1
   [Huawei-GigabitEthernet0/0/1] ip address 192.168.20.2 255.255.255.0
   [Huawei-GigabitEthernet0/0/1] quit

3. **配置OSPF**

   [Huawei] ospf 1
   [Huawei-ospf-1] area 0
   [Huawei-ospf-1-area-0.0.0.0] network 192.168.10.0 0.0.0.255
   [Huawei-ospf-1-area-0.0.0.0] network 192.168.20.0 0.0.0.255
   [Huawei-ospf-1-area-0.0.0.0] quit
   [Huawei-ospf-1] quit

### 验证配置
1. **查看OSPF邻居**

   [Huawei] display ospf peer

2. **查看路由表**

   [Huawei] display ip routing-table

通过以上步骤，你可以在eNSP模拟器中配置交换机和路由器的OSPF协议，实现网络的动态路由。