espi使用iic通信
时间: 2024-06-04 13:12:16 浏览: 15
ESPI (Enhanced Serial Peripheral Interface) 也可以使用 I2C (Inter-Integrated Circuit) 作为通信协议之一。在使用 I2C 作为 ESPI 的通信协议时,需要按照以下步骤进行设置:
1. 将 ESPI 的控制寄存器设置为 I2C 模式。
2. 设置 ESPI 的地址和数据寄存器的地址,以便在 I2C 总线上进行读写操作。
3. 根据 ESPI 的规格书,设置 I2C 总线的时钟频率和数据传输速率。
4. 使用 I2C 总线的读写函数来读写 ESPI 的地址和数据寄存器。
需要注意的是,ESPI 的 I2C 模式和标准的 I2C 协议有所不同,因此在使用时需要仔细阅读 ESPI 的规格书,并按照规定的方式进行设置和操作。
相关问题
作为主站的uno开发板向作为从站LILYGO t-diapaly s3开发板,使用IIC通信协议来通信,来发送一个Hello,要求使用TFT_eSPI库来写,并且避免屏幕闪烁
好的,针对您的问题,可以通过以下步骤来实现:
1. 在主站的Uno开发板上安装Wire库和TFT_eSPI库,并将其包含到代码中。
2. 在主站的Uno开发板上编写发送数据的程序,代码如下:
```
#include <Wire.h>
#include <TFT_eSPI.h>
TFT_eSPI tft = TFT_eSPI(); // 创建一个TFT_eSPI对象
void setup() {
Wire.begin();
tft.init(); // 初始化TFT屏幕
}
void loop() {
tft.fillScreen(TFT_BLACK); // 清空屏幕
Wire.beginTransmission(0x27); // 0x27是LILYGO t-diapaly s3的IIC地址
Wire.write("Hello"); // 发送数据
Wire.endTransmission();
tft.setCursor(0, 0);
tft.setTextColor(TFT_WHITE);
tft.setTextSize(2);
tft.print("Sent Hello"); // 在屏幕上显示"Sent Hello"
delay(1000);
}
```
3. 在从站的LILYGO t-diapaly s3开发板上安装Wire库,并将其包含到代码中。
4. 在从站的LILYGO t-diapaly s3开发板上编写接收数据的程序,代码如下:
```
#include <Wire.h>
#include <TFT_eSPI.h>
TFT_eSPI tft = TFT_eSPI(); // 创建一个TFT_eSPI对象
void setup() {
Wire.begin(0x27); // 设置LILYGO t-diapaly s3的IIC地址为0x27
tft.init(); // 初始化TFT屏幕
}
void loop() {
tft.fillScreen(TFT_BLACK); // 清空屏幕
if (Wire.available()) {
char c = Wire.read();
tft.setCursor(0, 0);
tft.setTextColor(TFT_WHITE);
tft.setTextSize(2);
tft.print("Received: ");
tft.print(c); // 在屏幕上显示接收到的数据
}
delay(1000);
}
```
这样,主站的Uno开发板就可以通过IIC通信协议向从站的LILYGO t-diapaly s3开发板发送数据了,并且使用TFT_eSPI库在屏幕上显示发送和接收的信息,而且不会出现屏幕闪烁的问题。
要避免使用 TFT_eSPI 库时屏幕闪烁,作为主站的uno开发板向作为从站LILYGO t-diapaly s3开发板,使用IIC通信协议来通信,来发送一个Hello
好的,针对您的问题,可以通过以下步骤来实现:
1. 在主站的Uno开发板上安装Wire库,并将其包含到代码中。
2. 在主站的Uno开发板上编写发送数据的程序,代码如下:
```
#include <Wire.h>
void setup() {
Wire.begin();
}
void loop() {
Wire.beginTransmission(0x27); // 0x27是LILYGO t-diapaly s3的IIC地址
Wire.write("Hello"); // 发送数据
Wire.endTransmission();
delay(1000);
}
```
3. 在从站的LILYGO t-diapaly s3开发板上安装Wire库,并将其包含到代码中。
4. 在从站的LILYGO t-diapaly s3开发板上编写接收数据的程序,代码如下:
```
#include <Wire.h>
void setup() {
Serial.begin(9600);
Wire.begin(0x27); // 设置LILYGO t-diapaly s3的IIC地址为0x27
Wire.onReceive(receiveData);
}
void loop() {
}
void receiveData(int byteCount) {
while (Wire.available()) {
char c = Wire.read();
Serial.print(c);
}
}
```
这样,主站的Uno开发板就可以通过IIC通信协议向从站的LILYGO t-diapaly s3开发板发送数据了,而且不会出现屏幕闪烁问题。
相关推荐
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)