配置交换机和路由器的ip命令
时间: 2023-11-16 16:05:37 浏览: 27
配置交换机的 IP 地址命令:
```
interface vlan <vlan_id>
ip address <ip_address> <subnet_mask>
no shutdown
```
其中,`<vlan_id>` 为 VLAN 接口的 ID 号,`<ip_address>` 为交换机的 IP 地址,`<subnet_mask>` 为子网掩码。
配置路由器的 IP 地址命令:
```
interface <interface_name>
ip address <ip_address> <subnet_mask>
no shutdown
```
其中,`<interface_name>` 为路由器的接口名称,如 GigabitEthernet0/0/0、FastEthernet0/0 等,`<ip_address>` 为路由器的 IP 地址,`<subnet_mask>` 为子网掩码。
相关问题
ensp交换机与路由器配置命令
配置ensp交换机的命令:
1. 进入特权模式:enable
2. 进入全局配置模式:configure terminal
3. 配置交换机主机名:hostname [name]
4. 配置管理IP地址:interface vlan 1 ; ip address [ip] [mask]
5. 配置端口:interface [interface] ; switchport mode access/trunk ; switchport access vlan [vlan-id] / switchport trunk allowed vlan [vlan-id]
6. 保存配置:write
配置ensp路由器的命令:
1. 进入特权模式:enable
2. 进入全局配置模式:configure terminal
3. 配置路由器主机名:hostname [name]
4. 配置管理IP地址:interface [interface] ; ip address [ip] [mask]
5. 配置路由协议:router [protocol] ; network [network-address] [mask]
6. 配置静态路由:ip route [destination-network] [mask] [next-hop-address]
7. 保存配置:write
华为交换机和路由器查询命令
华为交换机和路由器查询命令如下:
1. 查看系统信息:
display version
2. 查看设备配置:
display current-configuration
3. 查看接口状态:
display interface brief
4. 查看路由表信息:
display ip routing-table
5. 查看ARP表信息:
display arp
6. 查看设备CPU占用率:
display cpu-usage
7. 查看设备内存使用情况:
display memory
8. 查看设备温度:
display temperature
9. 查看设备电源状态:
display power
以上命令仅供参考,具体的命令使用方式可能会根据设备型号和软件版本的不同而有所差异。建议在使用命令时,先查看设备的使用手册或者官方文档,以确保正确的使用。