32串口接收hex数据
时间: 2023-08-09 08:09:06 浏览: 93
要在C语言中使用串口接收hex数据,你可以使用串口通信库来完成这个任务。下面是一个简单的示例代码,演示如何接收并解析hex数据:
```c
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <termios.h>
#define BUFFER_SIZE 1024
int main() {
int serial_port = open("/dev/ttyS0", O_RDWR); // 打开串口设备
if (serial_port < 0) {
perror("无法打开串口设备");
return -1;
}
struct termios tty;
memset(&tty, 0, sizeof(tty));
if (tcgetattr(serial_port, &tty) != 0) {
perror("无法获取串口属性");
return -1;
}
cfsetospeed(&tty, B9600); // 设置波特率为9600
cfsetispeed(&tty, B9600);
tty.c_cflag &= ~PARENB; // 无奇偶校验位
tty.c_cflag &= ~CSTOPB; // 1位停止位
tty.c_cflag &= ~CSIZE; // 屏蔽字符大小位
tty.c_cflag |= CS8; // 8位数据位
tty.c_cflag &= ~CRTSCTS; // 禁用硬件流控制
tty.c_cc[VMIN] = 1; // 读取至少一个字节
tty.c_cc[VTIME] = 5; // 读取超时时间
if (tcsetattr(serial_port, TCSANOW, &tty) != 0) {
perror("无法设置串口属性");
return -1;
}
char buffer[BUFFER_SIZE];
memset(buffer, 0, sizeof(buffer));
while (1) {
int bytesRead = read(serial_port, buffer, sizeof(buffer)); // 读取串口数据
if (bytesRead > 0) {
for (int i = 0; i < bytesRead; i++) {
printf("%02X ", buffer[i]); // 打印hex数据
}
printf("\n");
}
}
close(serial_port); // 关闭串口设备
return 0;
}
```
在这个示例代码中,我们使用了Linux系统的串口设备文件`/dev/ttyS0`,你可以根据实际情况修改为你所使用的串口设备文件。该代码打开串口设备并设置一些串口属性,然后不断地从串口读取数据并打印hex格式的数据。
请注意,这只是一个简单的示例代码,你可能需要根据你的实际需求进行适当的修改。