ubuntu下,usb设备信息显示为 Bus 002 Device 004: ID 0403:6001 Future Technology Devices International, Ltd FT232 Serial (UART) IC Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0403 Future Technology Devices International, Ltd idProduct 0x6001 FT232 Serial (UART) IC bcdDevice 6.00 iManufacturer 1 (error) iProduct 2 (error) iSerial 3 (error) bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0020 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 90mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 2 (error) Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 can't get device qualifier: Resource temporarily unavailable can't get debug descriptor: Resource temporarily unavailable Device Status: 0x0000 是什么原因
时间: 2024-02-10 10:34:27 浏览: 37
根据设备信息显示,USB设备是FT232芯片的串行通讯接口设备,但是在字段iManufacturer、iProduct和iSerial中显示为(error),原因可能是设备驱动没有正确加载或者设备没有正确识别。另外,can't get device qualifier和can't get debug descriptor的错误提示可能是由于权限不足或者其他系统问题导致的。可以尝试以root权限运行lsusb命令或者重启系统来解决这些问题。
相关问题
Future Technology Devices International, Ltd FT2232C/D/H Dual UART/FIFO IC
FT2232C/D/H 是一种由 Future Technology Devices International, Ltd 生产的双通道 USB 转串口芯片。该芯片支持 USB 2.0 接口,并集成了两个 UART 和 FIFO 缓冲区。它可以用作 USB 转串口适配器,用于将计算机的 USB 接口转换为串口接口,从而实现与串口设备的通信。
FT2232C/D/H 芯片还支持 JTAG 调试和 SPI 接口,并且可以通过 USB 进行编程。它被广泛应用于工业自动化、医疗设备、测试和测量设备等领域,以及一些嵌入式系统的开发和调试中。
为了使用 FT2232C/D/H 芯片,您需要使用适当的驱动程序和软件工具。通常情况下,您可以从 FTDI 官方网站下载并安装最新的驱动程序和工具软件。然后,您可以使用支持串口通信的软件(例如 Putty、Tera Term、Minicom 等)与您的目标设备进行通信。
ft232 usb uart驱动win10
FT232是一种USB转UART芯片,用于将串口信号转换成USB信号,实现串口设备与电脑的通信。在Windows 10 操作系统中,安装FT232驱动程序是非常重要的步骤,这意味着操作系统可以识别USB转串口芯片并与其通信。
安装FT232驱动程序的步骤如下:
1. 首先需要下载FT232驱动程序,可以从FTDI官网上或其他资源网站上下载。下载后解压缩到本地磁盘。
2. 将FT232与电脑连接,操作系统将自动检测并试图安装驱动程序,但是在大多数情况下,操作系统无法正确识别FT232。
3. 打开设备管理器,找到Ports (COM & LPT)选项,找到代表FT232的设备项,可能会显示为Unknown Device或者其他不明的设备名。
4. 单击右键,选择更新驱动程序。选择手动驱动程序安装,找到之前下载和解压缩的驱动程序文件,点击“下一步”。
5. 安装程序将检测该设备的驱动程序,如果找到驱动程序则安装成功,否则会提示未找到该设备的驱动程序,需要手动指定驱动程序文件路径。
6. 安装完成后,重新插入FT232,系统将重新检测设备并安装驱动程序。在设备管理器中,此时设备名称应该会变为FT232 USB UART或COM端口名称。
总之,安装FT232驱动程序是实现串口设备与电脑通信的关键步骤。如果无法正确安装驱动程序,将无法使用串口设备进行数据通信。