linux服务器之间时间同步chronyc sources
时间: 2023-07-20 18:04:13 浏览: 56
在 Linux 服务器之间进行时间同步,可以使用 chrony 工具来实现。以下是使用 chrony 进行时间同步的步骤:
1. 在所有服务器上安装 chrony 工具:
```
sudo apt-get install chrony
```
2. 修改 chrony 配置文件 `/etc/chrony/chrony.conf`,添加时间服务器源:
```
server time.server1.com iburst
server time.server2.com iburst
```
其中,`time.server1.com` 和 `time.server2.com` 是你要同步的时间服务器名称或 IP 地址。
3. 启动 chrony 服务,并设置为开机自启动:
```
sudo systemctl start chrony
sudo systemctl enable chrony
```
4. 查看 chrony 服务状态:
```
sudo systemctl status chrony
```
如果状态显示为 active (running),则表示 chrony 服务已经成功启动。
通过上述步骤,你可以在多台 Linux 服务器之间实现时间同步。你可以根据实际需要添加更多的时间服务器源,以提高时间同步的准确性和可靠性。
相关问题
Linux服务器时间同步
Linux服务器时间同步可以通过NTP协议来实现。具体步骤如下:
1.安装NTP服务:在终端中输入以下命令进行安装
```shell
yum install ntp
```
2.配置NTP服务:在终端中输入以下命令进行配置
```shell
vi /etc/ntp.conf
```
在打开的文件中添加如下内容:
```shell
server ntp1.aliyun.com iburst
server ntp2.aliyun.com iburst
server ntp3.aliyun.com iburst
```
这里以阿里云的NTP服务器为例,你也可以使用其他的NTP服务器。
3.启动NTP服务:在终端中输入以下命令进行启动
```shell
systemctl start ntpd
```
4.设置NTP服务开机自启:在终端中输入以下命令进行设置
```shell
systemctl enable ntpd
```
5.让集群自己同步时间:有两种方式
第一种方式:通过crontab来完成同步,推荐这种,容易控制时间同步频率。所有子节点配置定时任务,半分钟同步一次,命令如下:
```shell
crontab -e
```
在打开的文件中添加如下一条信息:
```shell
30 * * * * /usr/sbin/ntpdate master的ip或域名 >> /root/ntpdate.log 2>&1
```
后期需要观察一下/root/ntpdate.log中有没有定时同步时间的运行日志。
第二种方式:通过chrony来完成同步,命令如下:
```shell
yum install chrony
systemctl start chronyd
systemctl enable chronyd
```
6.检查时间同步是否成功:在终端中输入以下命令进行检查
```shell
timedatectl
```
如果输出结果中的NTP synchronized为yes,则表示时间同步成功。
linux 服务器时间同步
在 Linux 服务器上进行时间同步可以采用 NTP(Network Time Protocol)协议。NTP 是一种用于将计算机时钟同步的网络协议,它可以使得计算机之间的时钟差异达到毫秒级别以下。以下是在 Linux 上进行 NTP 时间同步的步骤:
1. 安装 NTP 服务:
```shell
sudo apt-get update
sudo apt-get install ntp
```
2. 配置 NTP 服务器。
在 /etc/ntp.conf 文件中添加下面的服务器地址(如下示例为中国标准时间服务器):
```shell
server cn.pool.ntp.org
```
3. 重新启动 NTP 服务:
```shell
sudo service ntp restart
```
4. 查看时间同步状态:
```shell
sudo ntpq -p
```
该命令将显示 NTP 服务器的连接状态和时间同步状态。
注意:如果您的服务器在防火墙后面,则需要打开 NTP 端口 123,以便服务器可以与 NTP 服务器进行通信。