stm32f103c8t6 用标准库函数实现rtc实时时钟串口输出
时间: 2023-06-05 20:06:57 浏览: 277
好的,这是一个技术问题,我可以回答。为了实现RTC实时时钟串口输出,可以使用STM32标准库中提供的RTC和USART库函数。具体的实现方法可以参考STM32F103C8T6的参考手册和标准库文档。需要注意的是,实时时钟的精度和稳定性与硬件电路设计和时钟源有关,需要在硬件和软件层面都进行优化和稳定性测试。
相关问题
写一个stm32f103c8t6 用标准库函数实现rtc 实时时钟串口输出的代码
好的,以下是实现rtc实时时钟串口输出的代码:
```c
#include "stm32f10x.h"
#include <stdio.h>
void USART1_Init(void) {
RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1 | RCC_APB2Periph_GPIOA, ENABLE);
GPIO_InitTypeDef GPIO_InitStruct;
USART_InitTypeDef USART_InitStruct;
GPIO_InitStruct.GPIO_Pin = GPIO_Pin_9;
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_AF_PP;
GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOA, &GPIO_InitStruct);
GPIO_InitStruct.GPIO_Pin = GPIO_Pin_10;
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_IN_FLOATING;
GPIO_Init(GPIOA, &GPIO_InitStruct);
USART_InitStruct.USART_BaudRate = 9600;
USART_InitStruct.USART_WordLength = USART_WordLength_8b;
USART_InitStruct.USART_StopBits = USART_StopBits_1;
USART_InitStruct.USART_Parity = USART_Parity_No;
USART_InitStruct.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
USART_InitStruct.USART_Mode = USART_Mode_Tx;
USART_Init(USART1, &USART_InitStruct);
USART_Cmd(USART1, ENABLE);
}
void RTC_Init(void) {
RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR | RCC_APB1Periph_BKP, ENABLE);
PWR_BackupAccessCmd(ENABLE);
if ((RCC->BDCR & RCC_BDCR_RTCEN) != RCC_BDCR_RTCEN) {
RCC_LSEConfig(RCC_LSE_ON);
while (RCC_GetFlagStatus(RCC_FLAG_LSERDY) == RESET) {
}
RCC_RTCCLKConfig(RCC_RTCCLKSource_LSE);
RTC_InitTypeDef RTC_InitStruct;
RTC_StructInit(&RTC_InitStruct);
RTC_InitStruct.RTC_AsynchPrediv = 0x7F;
RTC_InitStruct.RTC_SynchPrediv = 0xFF;
RTC_InitStruct.RTC_HourFormat = RTC_HourFormat_24;
RTC_Init(&RTC_InitStruct);
RCC_RTCCLKCmd(ENABLE);
RTC_WaitForSynchro();
}
}
void RTC_SetDateTime(uint8_t year, uint8_t month, uint8_t day, uint8_t hour, uint8_t minute, uint8_t second) {
RTC_TimeTypeDef RTC_TimeStruct;
RTC_DateTypeDef RTC_DateStruct;
RTC_TimeStruct.RTC_Hours = hour;
RTC_TimeStruct.RTC_Minutes = minute;
RTC_TimeStruct.RTC_Seconds = second;
RTC_TimeStruct.RTC_H12 = RTC_H12_AM;
RTC_DateStruct.RTC_Year = year;
RTC_DateStruct.RTC_Month = month;
RTC_DateStruct.RTC_Date = day;
RTC_DateStruct.RTC_WeekDay = RTC_Weekday_Monday;
RTC_SetTime(RTC_Format_BIN, &RTC_TimeStruct);
RTC_SetDate(RTC_Format_BIN, &RTC_DateStruct);
}
void USART1_SendChar(char c) {
while ((USART1->SR & USART_SR_TXE) == RESET) {
}
USART_SendData(USART1, c);
}
int USART1_SendString(const char* str, uint32_t timeout) {
int i = 0;
while (*str) {
USART1_SendChar(*str++);
i++;
if (timeout != 0xFFFFFFFF) {
uint32_t t = timeout;
while ((USART1->SR & USART_SR_TXE) == RESET) {
if ((t--) == 0) {
return -1;
}
}
}
}
return i;
}
int main(void) {
USART1_Init();
RTC_Init();
RTC_SetDateTime(21, 6, 30, 12, 0, 0);
char buf[32];
while (1) {
RTC_TimeTypeDef RTC_TimeStruct;
RTC_DateTypeDef RTC_DateStruct;
RTC_GetTime(RTC_Format_BIN, &RTC_TimeStruct);
RTC_GetDate(RTC_Format_BIN, &RTC_DateStruct);
sprintf(buf, "%04d-%02d-%02d %02d:%02d:%02d\r\n", RTC_DateStruct.RTC_Year, RTC_DateStruct.RTC_Month, RTC_DateStruct.RTC_Date, RTC_TimeStruct.RTC_Hours, RTC_TimeStruct.RTC_Minutes, RTC_TimeStruct.RTC_Seconds);
USART1_SendString(buf, 1000000);
for (int i = 0; i < 1000000; i++) {
__NOP();
}
}
}
```
写一个用标准库函数基于stm32f103c8t6的rtc实时时钟rtc初始化部分的代码
以下是使用标准库函数基于stm32f103c8t6的rtc实时时钟初始化代码示例:
```c
#include "stm32f10x.h" // 包含STM32F103C8T6库文件头文件
#include "stm32f10x_rcc.h" // 包含RCC系统时钟相关头文件
#include "stm32f10x_rtc.h" // 包含RTC实时时钟相关头文件
void RTC_Init(void)
{
RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR | RCC_APB1Periph_BKP, ENABLE); // 使能PWR和BKP的时钟
PWR_BackupAccessCmd(ENABLE); // 关闭备份写保护
RCC_LSEConfig(RCC_LSE_ON); // 启用LSE外部低速晶体振荡器
while (RCC_GetFlagStatus(RCC_FLAG_LSERDY) == RESET); // 等待LSE起振完成
RCC_RTCCLKConfig(RCC_RTCCLKSource_LSE); // 根据LSE作为RTC时钟源
RCC_RTCCLKCmd(ENABLE); // 启用RTC时钟
RTC_WaitForSynchro(); // 等待RTC寄存器同步
RTC_InitTypeDef RTC_InitStructure;
RTC_InitStructure.RTC_AsynchPrediv = 0x7F; // 配置异步预分频器为0x7F
RTC_InitStructure.RTC_SynchPrediv = 0xFF; // 配置同步预分频器为0xFF
RTC_InitStructure.RTC_HourFormat = RTC_HourFormat_24; // 配置RTC为24小时格式
RTC_Init(&RTC_InitStructure); // 初始化RTC寄存器
}
```
注意:该代码未添加错误处理和中断处理部分,仅供参考。