华为交换机堆叠配置及命令

华为交换机堆叠配置及命令：

1. 创建堆叠链路：

[HUAWEI] interface stack-port 1/0/1
[HUAWEI-Stack1/0/1] port link-type stack
[HUAWEI-Stack1/0/1] quit

2. 创建堆叠：

[HUAWEI] stack
[HUAWEI-stack] stack-member 1 priority 100
[HUAWEI-stack] stack-member 2 priority 90
[HUAWEI-stack] stack-member 3 priority 80
[HUAWEI-stack] quit

3. 查看堆叠状态：

[HUAWEI] display stack
[HUAWEI] display stack version

4. 堆叠端口配置：

[HUAWEI] interface Ethernet 1/0/1
[HUAWEI-Ethernet1/0/1] port link-type stack
[HUAWEI-Ethernet1/0/1] stack port-group 1
[HUAWEI-Ethernet1/0/1] quit

5. 堆叠端口组配置：

[HUAWEI] interface stack-port 1/0/1
[HUAWEI-Stack1/0/1] port-group 1
[HUAWEI-Stack1/0/1] quit

6. 堆叠端口优先级配置：

[HUAWEI] interface stack-port 1/0/1
[HUAWEI-Stack1/0/1] port priority 100
[HUAWEI-Stack1/0/1] quit

7. 堆叠端口状态：

[HUAWEI] display stack-port
[HUAWEI] display stack-port status

8. 堆叠端口链路聚合：

[HUAWEI] interface stack-port 1/0/1
[HUAWEI-Stack1/0/1] port link-aggregation group 1
[HUAWEI-Stack1/0/1] quit

9. 堆叠端口链路聚合状态：

[HUAWEI] display link-aggregation summary

注意：以上命令仅供参考，具体操作可能会因设备型号、软件版本等因素有所不同。请仔细阅读设备相关文档或咨询厂商技术支持人员。