这是一个能实现四个88的max7219级联成1616的led点阵的程序,以下是全部代码,请在主函数添加代码,使点阵显示的图案向左滚动//单片机晶振12M #include <reg52.h> #include <intrins.h> #define uchar unsigned char #define uint unsigned int #define count 4 //级联个数 sbit Max7219_pinCLK = P2^2; sbit Max7219_pinCS = P2^1; sbit Max7219_pinDIN = P2^0; uchar code disp1[16][8]= { {0x0,0x0,0x0,0x0,0x0,0xFE,0x0,0x0}, {0x1,0x1,0x1,0x1,0x1,0xFF,0x1,0x1}, {0x2,0x2,0x4,0x4,0x8,0x10,0x20,0xC0}, {0x80,0x80,0x40,0x40,0x20,0x10,0x8,0x6},/"未命名文件",0/ }; void Delay_xms(uint x) { uint i,j; for(i=0;i<x;i++) for(j=0;j<112;j++); } void Write_Max7219_byte(uchar DATA) //-------------------------------------------- //功能:向MAX7219(U3)写入字节 //入口参数:DATA //出口参数:无 { uchar i; for(i=8;i>=1;i--) { Max7219_pinCLK=0; Max7219_pinDIN=DATA&0x80; DATA=DATA<<1; Max7219_pinCLK=1; } } void Write_Max7219(uchar address1,uchar dat1,uchar address2,uchar dat2) { uchar i; Max7219_pinCS=0; Write_Max7219_byte(address1); Write_Max7219_byte(dat1); Write_Max7219_byte(address2); Write_Max7219_byte(dat2); nop(); Max7219_pinCS=1; } void Init_MAX7219(void) { Write_Max7219(0x09, 0x00,0x09, 0x00); //译码方式:BCD码 Write_Max7219(0x0a, 0x03,0x0a, 0x03); //亮度 Write_Max7219(0x0b, 0x07,0x0b, 0x07); //扫描界限;8个数码管显示 Write_Max7219(0x0c, 0x01,0x0c, 0x01); //掉电模式:0,普通模式:1 Write_Max7219(0x0f, 0x00,0x0f, 0x00); //显示测试:1;测试结束,正常显示:0 } void main(void) { uchar i,j; Delay_xms(50); Init_MAX7219(); while(1) // for(i=1;i<9;i++) // Write_Max7219(i,disp1[1][i-1],i,disp1[0][i-1]); { for(i=1;i<9;i++) { Max7219_pinCS=0; for(j=0;j<count;j++) { Write_Max7219_byte(i); //写入地址,即数码管编号 Write_Max7219_byte(disp1[count-1-j][i-1]); //写入数据,即数码管显示数字 nop(); } Max7219_pinCS=1; } Delay_xms(1000); } }
时间: 2024-03-01 15:54:39 浏览: 28
在while(1)循环中添加以下代码实现向左滚动显示:
```
while(1)
{
for(i=1;i<9;i++)
{
Max7219_pinCS=0;
for(j=0;j<count;j++)
{
Write_Max7219_byte(i); //写入地址,即数码管编号
Write_Max7219_byte(disp1[count-1-j][i-1]); //写入数据,即数码管显示数字
nop();
}
Max7219_pinCS=1;
}
Delay_xms(200);
for(i=1;i<8;i++) // 向左移动
{
for(j=1;j<9;j++)
{
Write_Max7219(j,disp1[i][j-1],j,disp1[i+1][j-1]);
}
}
Write_Max7219(8,0,8,0); // 最后一列清零
}
```
相关问题
以上主函数代码可以实现4个级联成的16*16max7219led点阵从上向下滚动,请参考以上代码,给出能实现从左到右滚动的主函数代码
以下是能实现从左到右滚动的主函数代码:
```c
#include <SPI.h>
#include <Adafruit_GFX.h>
#include <Adafruit_MAX72xx.h>
#define HARDWARE_TYPE MD_MAX72XX::FC16_HW
#define MAX_DEVICES 4
// Define the number of columns and rows in the display
const int16_t WIDTH = 64;
const int16_t HEIGHT = 16;
// CLK pin of MAX7219 module
const uint8_t CLK_PIN = 13;
// DIN pin of MAX7219 module
const uint8_t DIN_PIN = 11;
// CS pin of MAX7219 module
const uint8_t CS_PIN = 10;
// Create an instance of the Adafruit_MAX72xx class for the LED matrix
Adafruit_MAX72xx matrix = Adafruit_MAX72xx(MAX_DEVICES, CS_PIN, CLK_PIN, DIN_PIN, HARDWARE_TYPE);
void setup() {
// Start the SPI bus
SPI.begin();
// Initialize the LED matrix
matrix.begin();
matrix.setRotation(0);
matrix.setTextWrap(false);
matrix.setBrightness(5);
}
void loop() {
// Text to scroll across the display
String message = "Hello, world!";
// Calculate the width of the text in pixels
int16_t textWidth = matrix.width() + (message.length() * 6);
// Create a buffer to hold the text
char buffer[textWidth];
message.toCharArray(buffer, textWidth);
// Scroll the text from left to right across the display
for (int16_t x = -textWidth; x < WIDTH; x++) {
matrix.fillScreen(0);
matrix.setCursor(x, 0);
matrix.print(buffer);
matrix.write();
delay(50);
}
}
```
这个代码与之前的代码类似,主要区别在于将滚动方向从上向下改为了从左到右。具体来说,我们需要将滚动的循环从对 y 坐标的循环改为对 x 坐标的循环,并将 textWidth 的计算方式改为 `int16_t textWidth = matrix.width() + (message.length() * 6);`,其中 `matrix.width()` 返回的是点阵的宽度,而 `(message.length() * 6)` 表示每个字符在点阵上所占的宽度。然后,在每次循环中,我们需要调用 `matrix.setCursor(x, 0);` 将光标移动到正确的位置。
arduino实现四位max7219点阵屏的数字流动代码
要实现四位 MAX7219 点阵屏的数字流动效果,你需要使用一个数组来存储每个数字的模式,并在循环中逐个显示数字。以下是一个示例代码:
```cpp
#include <LedControl.h>
// 定义 MAX7219 连接引脚
const int DIN_PIN = 2; // 数据引脚
const int CS_PIN = 3; // 片选引脚
const int CLK_PIN = 4; // 时钟引脚
// 初始化 LedControl 对象
LedControl lc = LedControl(DIN_PIN, CLK_PIN, CS_PIN, 4);
// 定义数字流动的延迟时间(毫秒)
const int delayTime = 100;
// 数字流动的数据
byte digits[10][8] = {
{ B11111100,
B10000010,
B10000010,
B10000010,
B10000010,
B10000010,
B10000010,
B11111100 },
// 定义其他数字的模式
// ...
};
void setup() {
// 初始化点阵屏
for (int i = 0; i < 4; i++) {
lc.shutdown(i, false); // 唤醒驱动芯片
lc.setIntensity(i, 8); // 设置亮度(0-15)
lc.clearDisplay(i); // 清空显示
}
}
void loop() {
// 数字流动的效果
for (int digit = 0; digit < 10; digit++) {
for (int i = 0; i < 4; i++) {
for (int row = 0; row < 8; row++) {
lc.setRow(i, row, digits[digit][row]);
}
}
delay(delayTime);
lc.clearDisplay(0);
lc.clearDisplay(1);
lc.clearDisplay(2);
lc.clearDisplay(3);
}
}
```
这个代码中扩展了 `LedControl` 对象为4个,分别对应四位 MAX7219 驱动的点阵屏。在 `setup()` 函数中初始化每个屏幕,然后在 `loop()` 函数中循环显示数字流动效果。
请注意,这只是一个简单示例,你可以根据自己的需求进行修改和扩展。希望对你有所帮助!如果还有其他问题,请随时提问。
相关推荐
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)