void PrintCom(uint8_t *DAT) 什么意思
时间: 2023-08-15 22:12:41 浏览: 81
这是一个函数定义,函数名为PrintCom,参数为一个指向uint8_t类型的指针DAT。这个函数用于发送字符串数据。
在函数内部,使用了一个while循环来遍历DAT指针指向的字符串,然后调用UARTSendByte函数发送字符串中的每个字节数据。这样就能将整个字符串通过串口发送出去。
注意,此函数假设DAT指针指向的字符串以'\0'结尾,当遇到字符串结束符时,循环结束。
相关问题
#include "config.h" #define FOSC 22118400L //System frequency uint32_t baud=9600; //UART baudrate uint8_t RX_BUF[50]; uint8_t NUM_1=0; /************************************************************************ �� �� ���� ���ڳ�ʼ�� ���������� STC10L08XE ��Ƭ�����ڳ�ʼ������ ���غ����� none ����˵���� none **************************************************************************/ void UartIni(void) { SCON = 0x50; //8-bit variable UART TMOD = 0x20; //Set Timer1 as 8-bit auto reload mode TH1 = TL1 = -(FOSC/12/32/baud); //Set auto-reload vaule TR1 = 1; //Timer1 start run ES = 1; //Enable UART interrupt EA = 1; //Open master interrupt switch } /************************************************************************ ���������� ���ڷ���һ�ֽ����� ��ڲ����� DAT:�����͵����� �� �� ֵ�� none ����˵���� none **************************************************************************/ void UARTSendByte(uint8_t DAT) { ES = 0; TI=0; SBUF = DAT; while(TI==0); TI=0; ES = 1; } /************************************************************************ ���������� ���ڷ����ַ������� ��ڲ����� *DAT���ַ���ָ�� �� �� ֵ�� none ����˵���� API ���ⲿʹ�ã�ֱ�ۣ� **************************************************************************/ void PrintCom(uint8_t *DAT) { while(*DAT) { UARTSendByte(*DAT++); } } void Uart_Isr() interrupt 4 using 1 { if (RI) { RI=0; RX_BUF[NUM_1]=SBUF; NUM_1++; if(NUM_1>=49) NUM_1=0; if(NUM_1>=3) { if(RX_BUF[NUM_1]==0xF8&&RX_BUF[NUM_1-1]==0xF8&&RX_BUF[NUM_1-2]==0xF8) IAP_CONTR=0x60; } } } 什么意思
这是一段C语言代码,用于对STC10L08XE单片机进行串口初始化和数据发送。代码中定义了一个UART初始化函数UartIni(),用于配置串口通信的波特率和中断。代码还包含了一个发送单字节数据的函数UARTSendByte(),以及一个发送字符串的函数PrintCom()。此外,代码还包含了一个串口中断函数Uart_Isr(),用于接收串口数据并进行处理。
在代码中,使用了几个宏定义和变量:
- FOSC:系统频率,设置为22.1184MHz。
- baud:串口波特率,设置为9600。
- RX_BUF:接收缓冲区,用于存储接收到的数据。
- NUM_1:接收缓冲区的索引,用于指示下一个要存储数据的位置。
代码中的主要功能是初始化串口并提供发送数据的函数。另外,在串口中断函数中,还做了一些数据处理的操作。具体的功能和意义需要根据具体应用场景和其他代码来判断。
下面代码是一个复数类代码,重载了自增前置和后置运算,请将代码补充完整并调试。 #include<iostream> using namespace std; class Complex { private: int a; int b; public: Complex(int a = 0,int b = 0) { this->a = a; this->b = b; } void printCom() { cout<<a<<"+"<<b<<"i"<<endl; } Complex operator-(Complex &c2) { Complex tmp; tmp.a = this->a - c2.a ; tmp.b = this->b -c2.b ; return tmp; } Complex operator+(Complex&c2) { Complex tmp; tmp.a = a +c2.a; tmp.b = b +c2.b; return tmp; } Complex& operator++() { a++; ①_____________ ②______________ } ③_______________ { ④____________ tmp.a++; tmp. b++; return tmp ; } }; int main() { Complex c1(1,2),c2; c2=++c1; c2.printCom();//2+3i c2=c1++; c2.printCom();//2+3i cout<<"\n"; return 0; }
以下是补充完整的代码:
```cpp
#include<iostream>
using namespace std;
class Complex {
private:
int a;
int b;
public:
Complex(int a = 0,int b = 0)
{
this->a = a;
this->b = b;
}
void printCom()
{
cout<<a<<"+"<<b<<"i"<<endl;
}
Complex operator-(Complex &c2) {
Complex tmp;
tmp.a = this->a - c2.a ;
tmp.b = this->b -c2.b ;
return tmp;
}
Complex operator+(Complex&c2) {
Complex tmp;
tmp.a = a +c2.a;
tmp.b = b +c2.b;
return tmp;
}
Complex& operator++() {
a++;
b++;
return *this;
}
Complex operator++(int) {
Complex tmp(*this);
a++;
b++;
return tmp ;
}
};
int main() {
Complex c1(1,2),c2;
c2=++c1;
c2.printCom();//2+3i
c2=c1++;
c2.printCom();//2+3i
cout<<"\n";
return 0;
}
```
此代码实现了一个复数类,重载了自增前置和后置运算符。
1. 自增前置运算符 ++ 的重载函数返回一个 Complex 对象的引用,首先将 a 和 b 分别加 1,然后返回对象的引用。
2. 自增后置运算符 ++ 的重载函数需要接收一个 int 参数,用于区分自增前置和后置。该函数首先创建一个临时的 Complex 对象 tmp,将当前对象的值复制到 tmp 中,然后将 a 和 b 分别加 1,最后返回 tmp 对象。
3. 在 main 函数中,先执行前置自增运算 ++c1,将 c1 的值增加 1,然后将 c1 的值赋给 c2,最后输出 c2 的值。再执行后置自增运算 c1++,将 c1 的值增加 1,但 c2 的值并没有改变,最后输出 c2 的值。
相关推荐
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![application/x-rar](https://img-home.csdnimg.cn/images/20210720083606.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)