介绍一下struct _mat_t { void *fp; /< File pointer for the MAT file */ char *header; /< MAT file header string */ char *subsys_offset; /< Offset */ char *filename; /< Filename of the MAT file */ int version; /< MAT file version */ int byteswap; /< 1 if byte swapping is required, 0 otherwise */ int mode; /< Access mode */ mat_off_t bof; /< Beginning of file not including any header */ size_t next_index; /< Index/File position of next variable to read */ size_t num_datasets; /< Number of datasets in the file */ #if defined(MAT73) && MAT73 hid_t refs_id; /**< Id of the /#refs# group in HDF5 */ #endif char dir; /< Names of the datasets in the file */ };每个参数的意义
时间: 2024-05-01 16:19:09 浏览: 20
- `void *fp`: 文件指针,用于访问MATLAB文件。
- `char *header`: MATLAB文件的文件头字符串。
- `char *subsys_offset`: 文件中的偏移量。
- `char *filename`: MATLAB文件的文件名。
- `int version`: MATLAB文件版本号。
- `int byteswap`: 标记是否需要进行字节交换。
- `int mode`: 文件访问模式。
- `mat_off_t bof`: 文件的开始位置(不包括文件头)。
- `size_t next_index`: 下一个变量的索引/文件位置。
- `size_t num_datasets`: 文件中数据集的数量。
- `hid_t refs_id` (仅限MATLAB 7.3及更高版本): HDF5数据集的ID。
- `char **dir`: 文件中数据集的名称。
相关问题
struct xLIST_ITEM { listFIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE /*< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */ configLIST_VOLATILE TickType_t xItemValue; /*< The value being listed. In most cases this is used to sort the list in descending order. */ struct xLIST_ITEM * configLIST_VOLATILE pxNext; /*< Pointer to the next ListItem_t in the list. */ struct xLIST_ITEM * configLIST_VOLATILE pxPrevious; /*< Pointer to the previous ListItem_t in the list. */ void * pvOwner; /*< Pointer to the object (normally a TCB) that contains the list item. There is therefore a two way link between the object containing the list item and the list item itself. */ struct xLIST * configLIST_VOLATILE pxContainer; /*< Pointer to the list in which this list item is placed (if any). */ listSECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE /*< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */ };
这是一个双向链表(doubly linked list)的结构体定义。其中,TickType_t xItemValue是链表节点的值,pxNext和pxPrevious分别指向下一个和上一个节点,pvOwner指向包含该节点的对象,pxContainer指向包含该节点的链表。这个结构体也包含了一些用于数据完整性检查的变量,这些变量只有在configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES被设置为1时才会使用。
实现简单的字符设备驱动程序,要求能对字符设备执行打开、读、写、I/O控制和关闭这些基本操作。模块由一组函数和数据结构组成,用来实现一种文件系统、一个驱动程序和其他内核上层功能。 编写设备驱动源程序,即编写内核模块文件chardev.c和Makefile文件: static int device_open(struct inode *inode,struct file *file) //打开设备 static int device_release(struct inode *inode,struct file *file) //释放设备 static ssize_t device_read(struct file *filp,char *buffer,size_t length,loff_t*offset) //读设备 static ssize_t device_write(struct file *filp,const char *buff,size_t length,loff_t *off) //写设备 int init_chardev_module(void) //初始化字符设备 void exit_chardev_module(void) //关闭字符设备
好的,我已经理解了您的问题。以下是一个简单的字符设备驱动程序的示例代码,包括设备打开、读、写、I/O控制和关闭等基本操作。请注意,这只是一个示例,您需要根据自己的需求进行适当的修改。
chardev.c:
#include <linux/init.h>
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/uaccess.h>
#define DEVICE_NAME "chardev" //设备名称
#define BUF_LEN 80 //缓冲区大小
static int major; //主设备号
static char msg[BUF_LEN]; //缓冲区
static char *msg_ptr; //缓冲区指针
//打开设备
static int device_open(struct inode *inode, struct file *file)
{
static int counter = 0;
if (counter)
return -EBUSY;
counter++;
msg_ptr = msg;
try_module_get(THIS_MODULE);
return 0;
}
//释放设备
static int device_release(struct inode *inode, struct file *file)
{
counter--;
module_put(THIS_MODULE);
return 0;
}
//读设备
static ssize_t device_read(struct file *filp, char *buffer, size_t length, loff_t *offset)
{
int bytes_read = 0;
if (*msg_ptr == 0)
return 0;
while (length && *msg_ptr) {
put_user(*(msg_ptr++), buffer++);
length--;
bytes_read++;
}
return bytes_read;
}
//写设备
static ssize_t device_write(struct file *filp, const char *buff, size_t length, loff_t *off)
{
int i;
for (i = 0; i < length && i < BUF_LEN; i++)
get_user(msg[i], buff + i);
msg_ptr = msg;
return i;
}
//I/O控制
static long device_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
switch (cmd) {
case 1:
printk(KERN_INFO "IOCTL command 1\n");
break;
case 2:
printk(KERN_INFO "IOCTL command 2\n");
break;
default:
return -EINVAL;
}
return 0;
}
//设备文件操作结构体
static struct file_operations fops = {
.owner = THIS_MODULE,
.read = device_read,
.write = device_write,
.unlocked_ioctl = device_ioctl,
.open = device_open,
.release = device_release
};
//初始化字符设备
int init_chardev_module(void)
{
major = register_chrdev(0, DEVICE_NAME, &fops);
if (major < 0) {
printk(KERN_ALERT "Registering char device failed with %d\n", major);
return major;
}
printk(KERN_INFO "Chardev module loaded with major number %d\n", major);
return 0;
}
//关闭字符设备
void exit_chardev_module(void)
{
unregister_chrdev(major, DEVICE_NAME);
printk(KERN_INFO "Chardev module unloaded\n");
}
module_init(init_chardev_module);
module_exit(exit_chardev_module);
Makefile:
obj-m := chardev.o
all:
make -C /lib/modules/$(shell uname -r)/build M=$(PWD) modules
clean:
make -C /lib/modules/$(shell uname -r)/build M=$(PWD) clean
在使用前,请确定您的系统已经安装了适当的编译工具链和内核头文件。可以使用以下命令来编译和加载模块:
make
sudo insmod chardev.ko
您可以使用以下命令来测试设备驱动程序:
echo "Hello, world!" > /dev/chardev
cat /dev/chardev
sudo ioctl /dev/chardev 1
希望这能帮助您了解如何编写一个简单的字符设备驱动程序。
相关推荐
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)