Non-constant loop condition not supported for while verilog代码
时间: 2024-03-18 09:40:24 浏览: 28
在 Verilog 中,使用 `while` 循环时,循环条件也必须是一个常量表达式,不能使用变量。
例如,下面的代码是错误的:
```
integer i = 0;
while (i < n) begin // n 是变量
// do something
i = i + 1;
end
```
正确的做法是将变量 n 保存在另一个常量中,然后使用该常量作为循环条件,如下所示:
```
localparam integer max = 10; // 将变量 n 保存在常量 max 中
integer i = 0;
while (i < max) begin
// do something
i = i + 1;
end
```
注意,Verilog 中还有其他类型的循环,例如 `for` 循环和 `repeat` 循环,可以使用变量作为循环条件。
相关问题
Non-constant loop condition not supported for while
这个错误通常出现在使用 Verilog 的 `while` 循环时,循环条件不是一个常量。在 Verilog 中,`while` 循环的循环条件必须是一个常量,否则编译器无法在编译时确定循环是否会结束。
例如,以下代码将导致该错误:
```verilog
reg [3:0] count = 0;
while (count < 10) begin
// do something
count = count + 1;
end
```
在这个例子中,循环条件 `count < 10` 不是一个常量,因为 `count` 的值会在每次循环中改变。因此,编译器无法确定循环是否会结束,从而导致该错误。
要避免这个错误,可以使用 `for` 循环或 `repeat` 循环,因为它们的循环条件是一个常量。例如,以下代码是一个使用 `for` 循环的等价实现:
```verilog
reg [3:0] count;
for (count = 0; count < 10; count = count + 1) begin
// do something
end
```
如果需要使用 `while` 循环,循环条件必须是一个常量。例如,以下代码可以编译通过:
```verilog
reg [3:0] count = 0;
while (count < 10'd10) begin
// do something
count = count + 1;
end
```
在这个例子中,循环条件 `count < 10'd10` 是一个常量,因为 `10'd10` 是一个常量。当 `count` 的值达到 10 时,循环将结束。
Instructions for updating: non-resource variables are not supported in the long term
这个问题是一个警告信息,它提示你在 TensorFlow 升级到2.0及以上版本后,non-resource 变量将不再受支持。在 TensorFlow 2.0 及以上版本中,使用 `tf.Variable` 创建的变量默认情况下是 resource 类型的变量,这意味着它们会被 TensorFlow 的垃圾回收机制自动回收。如果你需要创建 non-resource 变量,可以通过设置参数 `use_resource=False` 来实现。如果你使用的是 TensorFlow 1.x 版本,你可以使用 `tf.get_variable` 来创建 non-resource 变量。