用c语言写一个温度采集函数
时间: 2024-02-23 16:58:16 浏览: 33
好的,以下是一个简单的温度采集函数的C语言代码示例:
```c
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <errno.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#include <linux/i2c-dev.h>
#define I2C_ADDRESS 0x48 // 温度传感器的I2C地址
#define TEMPERATURE_REG 0x00 // 温度寄存器地址
int read_temperature() {
int fd;
char buf[2];
float temperature;
// 打开I2C总线
if ((fd = open("/dev/i2c-1", O_RDWR)) < 0) {
perror("Failed to open i2c bus");
return -1;
}
// 设置I2C从设备地址
if (ioctl(fd, I2C_SLAVE, I2C_ADDRESS) < 0) {
perror("Failed to set i2c address");
return -1;
}
// 读取温度值
if (read(fd, buf, 2) != 2) {
perror("Failed to read temperature register");
return -1;
}
// 将读取到的数据转换为温度值
temperature = (float)(buf[0] << 8 | buf[1]) / 256.0;
// 关闭I2C总线
close(fd);
return (int)temperature;
}
int main() {
int temperature = read_temperature();
if (temperature < 0) {
printf("Failed to read temperature: %s\n", strerror(errno));
return -1;
}
printf("Temperature: %d\n", temperature);
return 0;
}
```
这段代码中,我们使用了Linux系统提供的I2C接口来读取温度传感器的值。具体来说,我们使用了`open`函数打开I2C总线,然后使用`ioctl`函数设置I2C从设备地址。接着,我们使用`read`函数读取了温度寄存器的值,并将其转换为温度值。最后,我们使用`close`函数关闭了I2C总线。需要注意的是,这段代码中的温度值是以浮点数的形式表示的,如果需要整数形式的温度值,可以使用`(int)`进行强制类型转换。